Power Distro Box fo...
 
Notifications
Clear all

Power Distro Box for Mega Tree

19 Posts
8 Users
0 Reactions
7,608 Views
Posts: 98
Topic starter
(@davedecali)
Estimable Member
Joined: 10 years ago
[#45082]

3200 pixels needed 4 power supplies and now just waiting on my distro boards. I am liking these BUD boxes.

Sent from my iPhone using Tapatalk


18 Replies
Posts: 98
Topic starter
(@davedecali)
Estimable Member
Joined: 10 years ago

4th power supply is with the controller.

Sent from my iPhone using Tapatalk


Reply
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

What's holding those power supplies? Some kind of sleeve?

Louie

Sent from my SM-G928V using Tapatalk


Reply
Posts: 98
Topic starter
(@davedecali)
Estimable Member
Joined: 10 years ago

I screwed into the back of the power supplies but didn't like the support... so used Velcro RC battery straps I had laying around... they feel pretty solid

Sent from my iPhone using Tapatalk


Reply
Posts: 598
(@nutz4lights)
Honorable Member
Joined: 17 years ago

Oh it looks like they're in some kind of holder.

Louie

Sent from my SM-G928V using Tapatalk


Reply
Posts: 192
(@rdj6107)
Estimable Member
Joined: 11 years ago

What model of bud box is that??


Reply
Posts: 98
Topic starter
(@davedecali)
Estimable Member
Joined: 10 years ago

BUD Industries NBF-32026 ... I got the smaller one but it was just slightly too small to orient the power supply how I wanted. This solution gives plenty of real estate.

Sent from my iPhone using Tapatalk


Reply
Posts: 944
(@didjareally)
Noble Member
Joined: 12 years ago

Hope that wiring was just for mockup? And make sure you set the voltage on the psus with a decent multimeter and dont go by the reading on those voltmeters, I have found they are pretty inaccurate.


Reply
Posts: 98
Topic starter
(@davedecali)
Estimable Member
Joined: 10 years ago

Elaborate... yes those power supplies were all tested when received. The gauges were more or less just for a quick reference on voltage. The power supplies are daisy chained with 12 g wire and sitting on a 20 amp circuit.

Sent from my iPhone using Tapatalk


Reply
rstehle
Posts: 4348
(@rstehle)
Illustrious Member
Joined: 19 years ago
didjareally wrote:Hope that wiring was just for mockup? And make sure you set the voltage on the psus with a decent multimeter and dont go by the reading on those voltmeters, I have found they are pretty inaccurate.

I must have gotten lucky with mine (exact same item) as mine are within +/- .1v from my multimeter.


Reply
Page 1 / 2
Share: