I'm replacing my incan mega-tree this year with pixels. It's 20-ft, and I want to keep that height.
I know these questions have been asked already, but I can't get a clear picture of what I want to do based on existing threads. That said, here are the questions I'm trying to answer for myself. I'd appreciate feedback on these from those who have been down this path.
- I want to do a full tree (360-degree). What considerations are there with effects on 360-degree trees?
- With a 20-ft tree, what distance between pixels is ideal? As for distance, the outer ring at the base of the tree will sit approximately 30 inches off the ground. The distance from top to base ring is around 19 feet.
- What type of pixel works "best"? It seems like many use these ( http://www.aliexpress.com/store/product/DC12V-input-WS2811-pixel-node-100pcs-a-string-IP68-rated-with-all-black-wires/701799_762876648.html ).
- Number of strings -- I think I want 48 strings around the tree. A "string" simply means a run of pixels from the top to the base. Is there an advantage to having 24 strings, where one string goes from the base to the top, then down the other side at a 180-degree angle?
I'm getting ready to make my pixel investment, so I want to be sure I go in fully understanding what I'm doing. If you've been-there-done-that, please share.
I just switched from my 30 strand 360 degree incand tree to 16 strand 180 degree pixel tree. I used 1/2" emt for each strand 20' long. I used the ws2801 square pixels similar to yours. It looks great! But took along time to get each strand zipped tied so that each pixel lined up with the next strand. Plus while handling them they like to turn even with the zip ties. Save yourself the hassle and go with stripes.
Tls 3001s .......... bullet style ......... there is no substitute 🙂 Imho .
If you want the ultimate in dimming performance these are the ones to get .
Spacing is an individual preference but I would suggest a minimum of 32 strings if you going 360 @ 20 ft.
I am increasing from 32 strings to 64 strings mine are @ 5' spacing and they are 17 ft long .
jeffro wrote:I'm replacing my incan mega-tree this year with pixels. It's 20-ft, and I want to keep that height.
I know these questions have been asked already, but I can't get a clear picture of what I want to do based on existing threads. That said, here are the questions I'm trying to answer for myself. I'd appreciate feedback on these from those who have been down this path.
- I want to do a full tree (360-degree). What considerations are there with effects on 360-degree trees?
- With a 20-ft tree, what distance between pixels is ideal? As for distance, the outer ring at the base of the tree will sit approximately 30 inches off the ground. The distance from top to base ring is around 19 feet.
- What type of pixel works "best"? It seems like many use these ( http://www.aliexpress.com/store/product/DC12V-input-WS2811-pixel-node-100pcs-a-string-IP68-rated-with-all-black-wires/701799_762876648.html ).
- Number of strings -- I think I want 48 strings around the tree. A "string" simply means a run of pixels from the top to the base. Is there an advantage to having 24 strings, where one string goes from the base to the top, then down the other side at a 180-degree angle?
I'm getting ready to make my pixel investment, so I want to be sure I go in fully understanding what I'm doing. If you've been-there-done-that, please share.
1- with pixel you can do million effect more than incan ....it will be hard to do 360 as those pixel need support theresfore using either emt or pvc will hide 1 side of the viewing not like incan wich are freely
2- distance betwenn pixel varied ... the closer the pixel the better gif effect you will have ...average is 4 inch but you can get them the leng you want
3-i am also using the same one and i king of like it BUT there is better one righ now for a litlle more http://www.aliexpress.com/store/product/50nodes-DC12V-WS2811-LED-technicolor-pixel-waterproof-full-color/701799_922175400.html ... theyy are better waterproof and easier to attache ..and stick with 12 volt as it is less power injection
4 wow 48 string ??? that is a lots of $$$ and work ....i went up and down because of less amount of controler .... and easier to power injection on the bottom than top ...also with the new 682 upgrate i can run 1 controler versus 2 for my tree ,,there is 16 hook up on the 682 so i coul run 32 string of 60 pixel ( 16 full string of 120 fold in half ) at 4 inch a aprt that will be close to 20 ft hight ....and 32 string will be a awsome tree ....as you dont have to go 360 you can do 270 and keep yourself a back room area to go in and out and no one will notice ,,,,
now here come the fun part ... those pixel cannot be free standing like old incan or led can do ..they need support so those pixel need to be attache wich is very time consumming and hard to keep all those pixel straih in line even with zip tied .....mine are not perfectly straight but from far apart you cannot see it .... i was debating with strip instead of sting and sometime i am wondering if i should had gone strip ..but i like the look of the string as it look more like the traditionel light
so here it is my test tree in my back yard righ now ... using 180 degree the top is very tigh and bottom are about 8-12 inch a part i only have 18 string on it in the video you be the judge ,,, and by the way the black bar is the play structure llol
