My Mega Tree
 
Notifications
Clear all

My Mega Tree

9 Posts
6 Users
0 Reactions
9,393 Views
Matt_Edwards
Posts: 2664
Topic starter
(@matt-edwards)
Famed Member
Joined: 18 years ago
[#14895]

When I asked Brian about including a designated section on final display items, I thought I would share my story of building my Mega Tree.

At the end of the 2009 season I decided it was time to build a LED Mega Tree. A Mega Tree is best described as a display item that outlines a traditional tree shape using strings of lights hanging from the top of a mast to the bottom at equally spaced distance around the base. There are many examples on the net – Mega Trees have become a basic item for most displays. Each string of light is individually controlled enabling all sorts and affects to be displayed. Generally multiple colours are used allowing more thematic displays to suit the chosen music track.

Construction

My tree has three main components:

  • some sort of a base
  • the mast
  • the crown to which the light strings attach

Welding the Base

The base serves to anchor the mast to the ground and keep it in place, and can be a very critical component. The use of guys assists with stability and allow to flimsier mast compared to a self supporting mast. I decided to use a self supporting mast. Some bases consist of a hole in the ground that the mast slips into. In the off season, the hole has a cap inserted. It is a permanent garden fixture. Other bases use a 5ft Star post or section of 25mm Rio Rod. These “shouldn’t” be permanent. however the effort to remove such a length of steel is no easy task. No matter what method is chosen, there are excellent examples on the web.

I had been toying with the idea of using a “Portable Hole”. I got the idea of the Portable Hole from Walter Monkhouse over at www.magicchristmas.org.

I came up with this design to enable me to move the hole easily. It is basically an old car wheel with a pipe stub welded to the Disk Brake Rotor. The mast slips into the pipe stub. The Eye bolts attached to the Rotor are anchor points. The eye bolts are then used to anchor the the base to 4 Reo rod pegs.

Whilst shopping at SuperCheap Autos I discovered they were selling Trailer Disc Hubs for $19 each!!!!!! How cool it was that. One local parts wrecker wanted to charge $10 for a 2nd hand one. No matter what I said, he wouldn’t budge. At first glance it looked like the Rotor main bearing OD was just a tad smaller that the OD of the Stub to be welded.

After copious amounts of grinding the mast stub OD, I managed to whack the stub into the rotor a decent amount. The stub was stick welded to the rotor using nice deep fillets. Next 4x 30mm angles were trimmed and welded to brace the rotor and stub.

I ended up not using Eye bolts. Exhaust pipe clamps were an easy solution for launching the turn-buckle fasteners.

Welding the Crown

The Sliding Crown enables the light strings to be hoisted up the mast. This is not totally necessary, but does have some major advantages:

String failures can easily be replaced during the season
The mast weight is significantly smaller for set up.

Two items need to be manufactured:

A pulley head frame to hold 2 pulleys to be mounted on the top of the mast. Provision will be made to mount additional hardware on the top of the mast.
A crown holding all the LED Stings will be used to hoist them up once the mast in place.

When I was web searching for ideas for the crown, I clicked my way to ChristmasLightShow.com, they sell nice Easy To Build 20′ Mega Tree Kit for $249USD. That is probably a good price for a complete kit, but postage to Australia would make the kit way over the top. BUT they use a very nice mega tree hook head. Very few details are on there website, but the concept is great, so I have started adapting it to my requirements.

The crown was manufactured by making three rings 3mm thick Galvanised Mild Steel. The end result was pretty OK.

The smaller ring simply provides stability to the upper crown, 4.5mm Dia nails hold the rings apart.
As can be seen from the photos, free forming 3mm steel by hand is hard, and I suck at it. Even so I am more than happy with the final result.
I had originally intended to use 3mm Bullet head nails , but then decided to use chain links cut at 11:00 and 2:00 o’clock.

Jumping to the finished product
I got to say I am more then pleased with the result

We even managed to add a 3d Star to the top.


8 Replies
Posts: 74
(@cscool36)
Estimable Member
Joined: 16 years ago

Hi Matt,

Good job.
One year I would like to make a mega tree too.

Colin


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
Good ideas, Matt. I also like your helper. Now if I could get Grumpy to do that, I'd have it made! None of this ladder stuff for me!

I like the way you did the spiral lights. Make it look great.

We just bought a new house and now all my display layouts have to change. Probably the Mtree will go on the house roof. It is relatively flat, so should be kind of easy to do.


Reply
Posts: 99
 dale
(@dale)
Estimable Member
Joined: 17 years ago

the spiral lights are very nice could you explain a little about how that is done


Reply
IdunBenhad
Posts: 1603
(@idunbenhad)
Noble Member
Joined: 18 years ago

Hi:
I'll let Matt explain it, but as the video is playing it can be stopped and you can see how the spirals are in the tree. At 55-56 seconds there are several frames showing the spirals.


Reply
Page 1 / 2
Share: