LabRat wrote:My current plan is about 1/2 of this...
- 100 ct minis folder in quarters.
- Just over 6' tall
- 3 ft diameter base (why? cuz that's how big the hula hoop is)
- 12 channels.. so 48 vertical strands.
I'll post pictures if/when it works.
That is close to what I use, only I have a 4' ring and 8 channels......
kjburns31 wrote:Thanks WayneI see you are the man for simple concepts as well. I didn't even think of simply folding them in Half. That will add density.
I saw your picture you posted in another thread. I like the whole setup. If you don't mind, I will just model after yours. Hopefully the setup will go quickly. I only have a total of 3 days, Day for mega, Day for Minis/Midis, and a day for leapers.
thanks
Sure, have at it. When you tie down the strings to the base ring use this order...
plugs of channel 1&2 side by side
females of 2&3 side by side
plugs 3&4 side by side
females of 4&5 side by side.
ect., ect.
The spacing between them is 9 7/16" apart (in a straight line on top of the tube C/L, not along the arc) on a 8' ring. You may have to adjust that number some.
Wayne J wrote:Sure, have at it. When you tie down the strings to the base ring use this order...
plugs of channel 1&2 side by side
females of 2&3 side by side
plugs 3&4 side by side
females of 4&5 side by side.
ect., ect.
Not sure I understand this or the reason for it. Isn't each Channel simply one 100ct strang folded in half? The females are not used, correct?
Kelly
kjburns31 wrote:Not sure I understand this or the reason for it. Isn't each Channel simply one 100ct strang folded in half? The females are not used, correct?Kelly
If I remember correctly, you are using Ren64's right? Then this places the plug ends together and close to the SSR's so you won't have to use as many extension cords. That is, of course, if your relay boxes are like mine, using duplex outlets. If that is not the setup you're using, then disreguard and sorry for the confusion. 😉
