Not sure if this is the right place for it or not, but it's a start!
Here are the parts I came up with for my mega tree. I had a wooden center pole last year that didn't work so well - just very awkward to work with, and I don't think the construction adhesive I used held up very well.
I was at Home Depot and saw the stake below. No price, but I went ahead and got it. Turned out to be about $15. On my way home, I thought of the leftover angle iron I had and came up with what's in the second picture - angle iron, cut at a 45 at the bottom, and lag-screwed to the corners of the post. The PVC part is a pipe reducer (or expander, in my case) - it'll go on top of the 3" PVC pipe that fits over the 4x4 (or, 2 2x4's) that I turned down to fit inside the bottom of the pipe. Good for 10' length - could probably do more with a PVC coupler, but 10' is good for me. I'm not sure yet how stable it will be - I probably add some extra ropes / wires to stabilize it rather than count on the light strings! If this works, I'll be making 2 more for the mini-mega-trees we decided to add.
I just had an idea I may have to look into - I saw the post about the PVC housing for SSR's (maybe the Ren16's? I forget what exactly it was, but good idea!) - I wonder if I could integrate the SSR's for the tree into this pipe as well?
Anyone else have any better ideas?
anymore on this?
Ben
Nope. It was an idea, and quite honestly... I ran out of time. 🙂
I went with what I had done before - probably wasn't as elegant as it could have been, but it's done and working!
The wood spike part did work out pretty well though.
Maybe next year...


