What's the best way to handle this? My front yard is a fairly steep slope, so the back of the tree could be 2-3' shorter than the front section. I guess it may be best to raise the base so the lower run can be made to be level with being obviously higher off the ground in the front then the back? I'm not sure how this would look and if I should consider a different method.
I guess the above method allows me to keep similar length strings, where running all the way to ground would create multiple length of strings/strips and that's just cruddy 🙂
Thanks
Tory
Perhaps embrace your idea by creating a lit tree trunk to the ground, and a ring to anchor the ends of the strings.
By lighting the trunk I think it would look good, just like a tree growing on a slope...
The larger the difference the odder level looks. Try a pvc ring in place if you like it go for, if not make custom strings to the ground.
Mine has about a 15 inch difference left to right.
Pause this
at about 0:30 and you can see it.
I have tent stakes with bungee cords to packing strips with GECE's attached. On the left the bungee's attach directly to the packing straps, on the front right I have tied about 15" of string between the bungee and the strapping.
