mega tree base ring...
 
Notifications
Clear all

mega tree base ring material ideas....go!

28 Posts
12 Users
0 Reactions
28.8 K Views
jchuchla
Posts: 8698
Topic starter
(@jchuchla)
Illustrious Member
Joined: 15 years ago
[#51452]

I've got a 25' megatree. Last year I used a base ring of 1" PVC. While I was able to bend it into a circle by hand, I found it to be too floppy. The strings pulled too hard on it and it would warp and bend freely as the wind blew. So I want a stronger one that won't warp on the vertical orientation. But I need a material that I'm able to bend into a ring without any specialized forming tools. The circumference is 40' so if I'm doing my math right, that would be about 12.75' in diameter. I'm thinking steel, but open to ideas.

I've heard about using trampoline frames for this, but I've been striking out in local craigslist listings.

So now I'm looking for other ideas.


27 Replies
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

Do a spoke and wheel with a dodecagon or a hexadecagon base. I did a 17 foot with an octagon and you do not notice at night. If my 8 is fine a 12 or 16 would be better. Spokes are the trick. 3/4 EMT on the base and 1/2 on the spokes


Reply
Posts: 103
(@lugnut68f)
Estimable Member
Joined: 10 years ago

h t t p s://indianapolis.craigslist.org/for/d/plainfield-pure-fun-12-trampoline/6988447170.html
Only a few hours down I-65 from you. Been posted for about a month so might be able to get it a little cheaper.


Reply
jchuchla
Posts: 8698
Topic starter
(@jchuchla)
Illustrious Member
Joined: 15 years ago
mrGrumpy wrote:Do a spoke and wheel with a dodecagon or a hexadecagon base. I did a 17 foot with an octagon and you do not notice at night. If my 8 is fine a 12 or 16 would be better. Spokes are the trick. 3/4 EMT on the base and 1/2 on the spokes

I did have spokes in mine. Only 4 though. Nonetheless, it still bent quite a bit. I can't imagine 3/4 EMT being significantly stronger than 1" PVC. I hadn't considered a non-circle polygon base. That sounds like a lot of skill to get it right. It would need as many sides as I have strings so that the math works out that all the strings are the same length. That's a whole lot of uniform bends.


Reply
jchuchla
Posts: 8698
Topic starter
(@jchuchla)
Illustrious Member
Joined: 15 years ago
lugnut68f wrote:h t t p s://indianapolis.craigslist.org/for/d/plainfield-pure-fun-12-trampoline/6988447170.html
Only a few hours down I-65 from you. Been posted for about a month so might be able to get it a little cheaper.

i'm seeing several in racine Wisconsin too. Both well further than I want to drive for a project like this.


Reply
Page 1 / 6
Share: