Mega(Mid?) Tree Que...
 
Notifications
Clear all

Mega(Mid?) Tree Question - Future Build

15 Posts
6 Users
0 Reactions
10.1 K Views
Posts: 47
Topic starter
(@navygator)
Trusted Member
Joined: 16 years ago
Stormyblade wrote:My mega tree is about the same dimensions you are asking about. My first year I went with a 6' diameter and my tree looked far too fat. Last year and this year I'm doing a 5' diameter for a tree that has 24 strings of 50 pixels and I use the Boscoyo tree topper with J bolts/hooks to hold them. Yes, it's a little tight at the top, but I just overlap each plastic strip (think of shingles overlapping) and it looks fine - none of my pixels are blocked by the overlapping. Oh, and 2" spacing is plenty - if you go to 1" you'll have a very dense tree that could be extremely bright, especially if you run at 50%+ brightness (I run mine at 25%). Now, if you plan on putting images onto the tree then you might want to go with 1" spacing, but if you do, make sure you plan on the right number of power supplies you'd need for all those lights -- I've got 2 of the 12VDC PSUs running my 1290 pixels on my tree (1200 for the tree, another 90 for the star on top).

Thanks for the input. Sounds like I need to look at a smaller base ring.

Is your tree 360, 270, 180, etc?


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago
NavyGator wrote:Thanks for the input. Sounds like I need to look at a smaller base ring.

Is your tree 360, 270, 180, etc?

I forgot about this detail in my response. It's a 360 degree tree because it sits in the middle of the yard on a corner lot.


Reply
Posts: 47
Topic starter
(@navygator)
Trusted Member
Joined: 16 years ago

Thanks!


Reply
Posts: 92
(@curtinti)
Estimable Member
Joined: 7 years ago
NavyGator wrote:Hi Everyone,

I am thinking about building my first pixel display item to use next year. I have a height of 9 feet with a 6 foot diameter base in mind with a 180 degree viewing angle. The viewing distance for the tree would be around 20 to 30 feet or a little closer if someone is on the sidewalk.

Do any of you have experience with staggering pixels toward the top of the tree to keep them from bunching up or is that a bad idea? If it is a bad idea does it have to do with sequencing or something else?

What recommendation do you guys have for pixel spacing? I have thought about 1, 2 or 3 inch spacing.

What recommendations do you have on the number of strings? 16 seems like it might not be enough but 24 seems like it might be too much. Does, what appears to be, the old rule of increasing string count by 8 even matter with pixels? If so, why?

I am thinking of building the tree out of EMT and EMT fittings so I hopefully won't need to use guy wires. The main pole would be 1.25 or 1.5 EMT or rigid EMT and the rest of the structure would be 1/2 inch EMT. EMT hangers and straps would be repurposed to join all pieces together in a manner that allow the 4 long and 4 short supports to fold against the main pole for storage. The base would be made in 8 sections for separate storage.

Thanks in advance for the feedback.

Rich

Rich,

This was my first year in pixels. Welcome to the club. I did a tree pretty close to what you described. The height was around 8 feet and the base was a 6ft diameter. It is a 180 with 24 strings (50 pixels each - 2 in spacing) for a total of 1,200 pixels. It is probably 30ft from the street. I don't think it looks fat at all. In fact a little wider (in my opinion) is better for some effect and laying video/text across it. For my first crack at it I think it came out great. I would certainly recommend going thicker than the 3/4 in EMT I used as a center pole. The weight of all of these pixels is causing a slight bend at the top. I'm hoping it can hang in there until new years ... lol. I will definitely re-engineer this for next year. The pixel trees to the side are 5ft for context.

I am very happy with the density. I actually started with a plan for a 12 string tree and then immediately went inside and ordered more pixels after watching one sequence. It's the centerpiece of most shows so don't skimp here.

Tim


Reply
Posts: 47
Topic starter
(@navygator)
Trusted Member
Joined: 16 years ago
curtinti wrote:Rich,

This was my first year in pixels. Welcome to the club. I did a tree pretty close to what you described. The height was around 8 feet and the base was a 6ft diameter. It is a 180 with 24 strings (50 pixels each - 2 in spacing) for a total of 1,200 pixels. It is probably 30ft from the street. I don't think it looks fat at all. In fact a little wider (in my opinion) is better for some effect and laying video/text across it. For my first crack at it I think it came out great. I would certainly recommend going thicker than the 3/4 in EMT I used as a center pole. The weight of all of these pixels is causing a slight bend at the top. I'm hoping it can hang in there until new years ... lol. I will definitely re-engineer this for next year. The pixel trees to the side are 5ft for context.

I am very happy with the density. I actually started with a plan for a 12 string tree and then immediately went inside and ordered more pixels after watching one sequence. It's the centerpiece of most shows so don't skimp here.

Tim

Thanks Tim. The wife and I are excited about this with our plan of working all year to get ready. She alsoikes that I am asking her what display items she would like.

We are gonna go in kind of heavy with our initial order from Ray. Probably 31 strings of 100 nodes and 11 2.5m 32pixel per meter strips.

Ideally I will try and document our mid tree build. I am trying to think about a topper design to mount all of the strips to the top of the tree and keep it relatively pointed.


Reply
Page 2 / 3
Share: