jeffmill wrote:Wayne Kremer has a photo how-to on his site, it's under "Details"Tim Fischer has a good how to and a video of the assembly at the bottom of the page.
jeff
Thanks for saving me the trouble. Those look like good links.
Tony
Macrosill wrote:My Mega Tree is made from the "PVC tree kit" at Darryl Brown's site, www.christmasdisplays.com. The frame is painted black and stands at 10 feet. The base is about 6 feet in diameter. The topper is a 42" snowflake and brings the tree to just shy of 14 feet tall. I hung 4800 leds of reb, green and blue. They are divided into 16 channels around the tree. 100 leds per channel. Each channel is made up of 2 sets of 50 leds that run up and down next to one another at about a 7 inch spacing. This gives the channels a fuller look to them, as apposed to a single strand. It makes for some smoother chases, imoa. You can see a pic of the tree to the left or go to my site for some bigger ones, the link is in my sig.This year I plan on making the tree 3 feet taller since I had about 3 feet of extra length on the led strings.
I love you tree Brian. Anyway isn't the site http://christmaslightshow.com and the DIY section http://christmaslightshow.com/doityourself/ for Dayrl Brown.
The other site has cool stuff also, but not a mega tree like yours!
Thanks about the compliments grages. And thanks for pointing out my mistake. I have corrected it.
I finally got mine done... 12' tall, 8' base ring. 48 channels, 16 Red, 16 Blue and 16 Clear. The star is an aditional 3 channels.
The center pole is 3" pvc, reduced to 1½. It has two sets of 3 guy wires.
Can't wait to see it lit up! 🙂
Here is my mega tree.
12' tall. 6 inverted-V slices. 5 channels each.
http://www.doityourselfchristmas.com/forum/viewtopic.php?t=1074&highlight=mega
I've added strobes, but haven't found star (that i like) for the top yet.


