Does physical strin...
 
Notifications
Clear all

Does physical string layout matter?

4 Posts
2 Users
0 Reactions
2,651 Views
Posts: 447
Topic starter
(@glycerine)
Honorable Member
Joined: 7 years ago
[#53379]

I will hopefully be setting up my mega tree this weekend. Other than connecting the strings "in order", does it matter if I go clockwise/counter-clockwise and where string 1 is? This will be a 32 string, 360 degree tree with each string having its own port on the controller. Thanks!


3 Replies
Posts: 447
Topic starter
(@glycerine)
Honorable Member
Joined: 7 years ago
MikeKrebs wrote:It should match your element/model setup either in patching or by default.

Ok, I'll have to take a look at xlights then. I've used it enough to have created a tree model and learn some sequencing, but don't recall anywhere that I setup the string layout. Thanks.


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

If you look at the node layout of your mega tree model it will show you how it is laid out.


Reply
Posts: 447
Topic starter
(@glycerine)
Honorable Member
Joined: 7 years ago
MikeKrebs wrote:By default, xLights does bottom left and goes around the tree to the right. So string 1 starts at the bottom and goes up the tree. String 2 is to the right when looking at the tree from "the front".
K-State Fan wrote:If you look at the node layout of your mega tree model it will show you how it is laid out.

Thank you both! :thup2:


Reply
Share: