ASAP pole question
 
Notifications
Clear all

ASAP pole question

22 Posts
6 Users
0 Reactions
8,950 Views
Posts: 128
Topic starter
(@emuney18)
Estimable Member
Joined: 11 years ago
[#45238]

I was building the ASAP pole last night and a question came up. This pole is the standard one on Walters website with 1 1/4 rigid conduit pipe paired with 1" gal pipe. The instructions for the slip bushing say to use a 1 1/4 pvc male adapter. Do I screw this into the coupling that comes with the rigid conduit?

Sent from my iPhone using Tapatalk


21 Replies
Posts: 205
(@barlav)
Estimable Member
Joined: 11 years ago

Yes, I used the galvanized bushing and that screwed onto the conduit coupling. Imagine the pvc is the same.


Reply
Posts: 128
Topic starter
(@emuney18)
Estimable Member
Joined: 11 years ago

Portable Hole question. Is the coupling supposed to be the rigid conduit coupler or galvanized coupling?

Sent from my iPhone using Tapatalk


Reply
Posts: 205
(@barlav)
Estimable Member
Joined: 11 years ago

You should use a coupling with ridges if possible. They are available at the big box stores.


Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

Bump so I can find later. Kicking around option of ASAP, ASAP Sr., JUMP, or JUMP HD right now....


Reply
Page 1 / 5
Share: