I have 2 different brands of lights I am trying to make work on my megatree. My goal is a 24 channel (12 white, 12 multi) 12ft tall mega tree. What I have is
qty 24 - 22.5ft long 100ct white mini lights
qty 24 - 16ft long 70ct Multi color LEDs
The way I see it I have 2 choices
1.Connect the white strings end to end and fold them into into 3 strings about 15ft. This gives me a 3 to 2 string ratio but I was really wanting a 1 to 1. (Kind of a hassle)
2. Go 1 to 1 and hide the extra 6 foot within the base somehow (Easiest, but waste of lights)
I was just wondering if if there is a 3rd not so complicated choice I am missing that someone else has used successfully. Any tips on creative braiding or something similar to shorten the 22ft long string? One thought I had was to attach the Multi to a cable, then wrap the whites around the cable, but I am not sure thats worth the effort.
buy smaller lights.....just kidding there are many options to this matter...making your own custom lengths using proper voltage mini lights to total 120 volts or by just using smaller strings like 10 count, 20 count, 25 count, 35 count, and 50 count or 100 count lights...the secret to the 100 count lights is there are 2 sets of 50 lights with in the string. where they separate is the only point in between the lights that have two wires instead of three wires. if non of those lengths or counts work for you light caps or just merely hiding the lights is usually a good method as well.
as for your post...you could always solder the strings together then this will eliminate the gap and the plugs of the tree strings .... i did this on all my framing of my house ...looks great zero gaps and zero extra wire.
This is what I get for buying everything on sale on December 26th and then coming up with a plan. The cut and solder is a good idea, Right now I am using zip ties to hold the lights at proper placement but there is an extra 2ft of extra wire hanging there.
hasoon wrote:This is what I get for buying everything on sale on December 26th and then coming up with a plan. The cut and solder is a good idea, Right now I am using zip ties to hold the lights at proper placement but there is an extra 2ft of extra wire hanging there.
yeah...well you will learn what you tend to like and also learn when to put the idea for next year...when doing that it allows you to buy and plan things cheaper rather than doing last minute buying and spending a fortune.
Put 'em in the dryer, high heat permanent press, spin for about 3 hours. My wife says that should shrink most anything. The down side is that few if any bulbs will remain. But that's what you wanted anyway, right????
dirknerkle wrote:Put 'em in the dryer, high heat permanent press, spin for about 3 hours. My wife says that should shrink most anything. The down side is that few if any bulbs will remain. But that's what you wanted anyway, right????
Right? 🙂 i was thinking of wrapping the whole string in shrink tubing heat it up and hope that its shorter lol
Make your tree 15 foot rather than 12. Then nicely coil the leftovers and the snow will cover them. Or run them towards the pole looks good without covering them up. No one will notice if they are short on the ground.
Sent from my SCH-I500 using Tapatalk 2
Skunberg wrote:Make your tree 15 foot rather than 12. Then nicely coil the leftovers and the snow will cover them. Or run them towards the pole looks good without covering them up. No one will notice if they are short on the ground.Sent from my SCH-I500 using Tapatalk 2
I like this suggestion. I would not modify the strings too much. As soon as you do, You limit their versatility and lock yourself into a design.
Also, if your tree is 15 ft high, the strings will be longer than 15ft. Good old Pythagoris 🙂
Skunberg wrote:Make your tree 15 foot rather than 12. Then nicely coil the leftovers and the snow will cover them. Or run them towards the pole looks good without covering them up. No one will notice if they are short on the ground.Sent from my SCH-I500 using Tapatalk 2
actually regardless of snow this technique looks good anyways especially if the lighted portion reaches the pole it will look like a skirt or a fully lit tree 3D.
Thanks for the input, but after screwing with what I had for half a day and never being happy I just found my solution, Buy more lights! LOL. I was just at Menards and they have the 100ct multi color incans for only 2.68 each. $65.00 and I'll just make the base a little taller than planed and I'm done. Wish I had this revolation this morning because I'd rather have spent the 65 bucks and had all my time back. Oh well, Hindsight... Now what to do with all these Multi Mini LEDs???I
