What is the best way to get strobes into a mega tree? Do I figure out how to hang them in the center or just weave them into the lights themselves?
I though about guy wires on the insides of the diameter of the light strings and use those to hang the lights from. Is that a good way?
The tree is about 20' total.
Thank you for any advice,
Jason
aixelsyd wrote:What is the best way to get strobes into a mega tree? Do I figure out how to hang them in the center or just weave them into the lights themselves?I though about guy wires on the insides of the diameter of the light strings and use those to hang the lights from. Is that a good way?
Thank you for any advice,
Jason
I guess it depends how many you are using. Last year I had 7 strobes in my mega tree. I just ran one zip line from the top to the bottom of the base. It looked fine. This year I will be adding more and will probably just wire tie them to the existing light strands.
The most common that I've seen is a c9 string zig zag inside the tree not using every socket. 15 to 25 is common amount of strobes in a megatree. Note that even though this is the most common, strobes in megatrees very greatly.
Brian
I plan to have 192... hehee
I'll see if I can find a pic I took of mine. I did the Zig-Zag thing that Brian mentioned. I just counted and I had 20 strobes on my 14 ft Mega Tree. They were on two channels. I took an old C9 strand and removed 3 out of every 4 sockets. I then zip-tied them to my Mega Strands. Worked great.
budude wrote:I plan to have 192... hehee
Yah, but you cheated with those no-see-um SMD jobs... 😆
Skunberg wrote:The most common that I've seen is a c9 string zig zag inside the tree not using every socket. 15 to 25 is common amount of strobes in a megatree. Note that even though this is the most common, strobes in megatrees very greatly.Brian
This is what I have done.
I have 10 in my tree and once the lights are up I go back and zig zag the strobe string across the mini strings using the clips on the C9 sockets to hold them to the strings. I also only mount them to the front of the tree instead of putting them all around.
I have 15 strobes in my mega, 3 strings of 5 each.
To make the strings, I used zip cord and C9 sockets. It's about 24' from the bottom, up to the top, and then back down again. On the first 12 foot I placed sockets at 4' and 8', and on the other 12' I placed them at 1', 6' and 11'.
The 3 strings are then run just like the rest of my mini lights: stake in the ground, up to the top, and then back down. They are evenly spaced around the tree.
If you look closely at the last picture here: http://www.landolights.com/main/component/option,com_ponygallery/func,viewcategory/catid,24/startpage,2/Itemid,62/#category
(click on the pic twice for the largest size and look close), you can see them.
mkess wrote:I have 10 in my tree and once the lights are up I go back and zig zag the strobe string across the mini strings using the clips on the C9 sockets to hold them to the strings. I also only mount them to the front of the tree instead of putting them all around.
I do something similar, but I use 3 pieces of paracord to attach the strobes to, that way they don't add any weight to the strings and make them sag more. I use 25 per 16' trree, all in the front half of the tree, and I think it looks pretty good.
