30' mega tree
 
Notifications
Clear all

30' mega tree

16 Posts
9 Users
0 Reactions
8,431 Views
scottmcm
Posts: 621
(@scottmcm)
Prominent Member
Joined: 19 years ago

At 30 feet I think you need a new name for it. Mega tree just doesn't seem BIG enough! :wink2:


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

I wouldn't cut it down for light length. Pixels are any length. If you cut it, do it for another reason. Like you want to hinge it down and you yard is too small. Or the city won't let you have it higher than your house. Those would be reasons to cut it down to size.


Reply
Posts: 21
(@fbiff)
Eminent Member
Joined: 13 years ago

Those big concrete bases in the parking lots are not just to protect the pole, a 30' pole will have a lot of torque at the base. Also please make sure the weld at the base plate is solid. I only say these things because we have had several light poles give out in the last few years due to corrosion at the base plate. I have also seen several 15-18'poles toppled by a simple extension ladder being used to repair the fixture. I say full steam a head, and good luck!!!


Reply
Wolfie
Posts: 2225
(@wolfie)
Noble Member
Joined: 11 years ago
Tyler_Wilson wrote:Well I got lucky with this one. Went with my girlfriends uncle to help him load a 20'ft platform deer stand. So happened he was picking two of these poles up as well, so we grabbed me one. Toying with the idea of cutting it down some. 30ft is an odd height to find lights for

No. 30ft is even. Not odd. 31 would be odd 😉


Reply
Posts: 5
Topic starter
(@tyler-wilson)
Active Member
Joined: 17 years ago

Planning a 5 square hole 5 feet down, poured with concrete with plenty of rebar reenforcement. I'm not sure if the county has any ordinances against it. I highly doubt it as the guy we got it from has a 60' flag pole in his front yard and hers in the same county.

I believe were gonna keep it 30' plan to keep a running thread (probably use this one) to update over the year on the progress of the build.

Wonder how close to "one of a kind" I can get!


Reply
Page 3 / 4
Share: