I don't have a big enough yard for a full Mega Tree, however my house is quite tall and is perfect for building a flat 2D tree. I looked through this thread, but couldn't find any examples of anyone doing anything similar.
has anyone done such a thing? Any how-tos out there so I don't re-invent the wheel?
I want RGB, and I have about 16-20 feet in height to play with, and roughly 8-10 feet in width.
If you were starting this from scratch and wanted to build something quickly, would you go with strings of light (like from here for instance) (I confirmed that this string also can only show one color at a time)
http://www.aliexpress.com/store/product/IP68-DC12V-input-12mm-through-hole-LED-channel-letter-RGB-color-100pcs-a-string/701799_522236867.html
Or would you use LED cords like these (I'm assuming these would only be 1 color at a time per cord)
http://www.holidaycoro.com/RGB-LED-Strip-12v-30-LEDs-per-Meter-Waterproof-p/59.htm
What I want to do is control each of the LEDs individually.. I guess I need to study up more on that.
I'm a complete NOOB when it comes to RGB, so I'm looking for some good insight (which I always get when I post).
Thanks
Mike
The tree shown in this video is 2D (starting at about 1:55 and after) - it's on the face of a 3-story building. From a distance, it looks the same as a 3D tree, except you don't see thru to the back (3D trees can be that way also).
AFAIK, they didn't use any special construction techniques - just the regular techniques of anchoring the strings at the top and bottom. I can put you in touch with the designers and builders if you would like more info. For a 2D tree you could afix the top to a wall, tree, or some other object if you did not want to put up a pole.
(BTW, this light show is synced to *live* music - the musicians are lit in the windows at some points).
EDIT: here's the link:
don
djulien wrote:The tree shown in this video is 2D (starting at about 1:55 and after) - it's on the face of a 3-story building. From a distance, it looks the same as a 3D tree, except you don't see thru to the back (3D trees can be that way also).AFAIK, they didn't use any special construction techniques - just the regular techniques of anchoring the strings at the top and bottom. I can put you in touch with the designers and builders if you would like more info. For a 2D tree you could afix the top to a wall, tree, or some other object if you did not want to put up a pole.
(BTW, this light show is synced to *live* music - the musicians are lit in the windows at some points).
don
I don't see a link anywhere!?!?....
"RGB" lights can be controlled to any color but the whole string is the same color.
"Pixels" are RGB lights with a control chip for each bulb so each bulb can be controlled individually.
Both your links for lights are RGB. Your first link to Ray's store are 12mm bulbs, are spaced 3 inches apart and are close to normal Christmas light strings in looks and hanging up. Your second link to Dave's store are 5050 strips 1.3 inches apart, strips are a flexible circuit board so you can't fold them and can't bend them 90 degrees (turn with them). To turn you must cut them and solder on wire (the wire makes your 90 ). I've seen a few 2d trees here but I don't remember what they were called to search for them, sorry. Mega trees or half Megatrees or flat (2d) Megatrees almost all use strings like your first link. But the wires are too wimpy to support the 20 foot string. You will need to tie them to cable or PVC or banding straps or some other idea. Strips could be attached to PVC also. So I'll let you stew over this and come back with some more questions. You should take a look at the WIKI also, lots of good reading there (see link at top of page).
Brian
n_gifford wrote:I don't see a link anywhere!?!?....
d'oh. I've added it now to my previous post.
don
I spent a lot of time researching last night.. I think I've got at least the "basics" down.. although the actual construction still seems somewhat daunting (fyi.. I'm looking at this for NEXT year.. but I want to start buying stuff either now, or right when all the stuff goes on sale.
I think the 2 best solutions for me both revolve around the Sandevices E682 controller. For the strings of light, it's either using some of Ray Wu's 12mm RGB full LED pixel module (TLS3001 IC) http://www.aliexpress.com/store/product/12mm-RGB-full-LED-pixel-module-TLS3001-IC-DC5V-input-50pcs-a-string-input-end-with/701799_677880352.html or use GE Color Effects strings which appear to also work with the E682.
With Ray's strings, I'm a little unclear how the configuration would be. They have 50 Pixels per string, but I'm not sure how long they are. It says 2M cable, but I think that's just the Power and Data cable at the end. If they are only 2M, then I'm assuming I'd need 3 strings to make roughly 18 feet, and then I'd need to put 8 of those sets together for a total of 24 strings (which would add up to 1200 pixels (Would a single E682 handle that many pixels?)) Man that sounds like a lot of work.
Also Ray sells strings with 12MM and 15MM LEDs, which are the most popular for this application? They seems to be the same price.
It would be nice if his site stated the distance between LEDs. That would answer a lot of questions.
The Video mentioned in the 2nd post (thanks djulien) in the thread has a flat tree which looks like it contains 14-16 strings (top to bottom).. It's hard to gauge the height, but you can see someone walk in front of the lit tree at about the 2 min mark, so I'm guessing that tree is at least 18 feet high.
If anyone has any more videos of flat trees, please share.. Especially videos showing construction or daytime post assembly.
Thanks!
Mike
I believe most of Ray's strings use 4" spacing inless you request a custom spacing size......
I would go with these instead:
And then tiewrap them to some plastic package wrapping strips like was shown on one of the megatrees, then build some kind of fram out of either wood or pvc pipes and make a "tree" shape, in fact, I plan on doing something similar myself for next year. If you place these kind of modules on somekind of flat surface, you will get a better visuality from the font than if you use the more regluar shaped leds, they will tend to "twist" into unwanted shapes.
jaywalk101 wrote:I believe most of Ray's strings use 4" spacing inless you request a custom spacing size......
That would make the string roughly 16 feet, which is all I really need. So then I'd only need 8 strands.
Slite wrote:I would go with these instead:And then tiewrap them to some plastic package wrapping strips like was shown on one of the megatrees, then build some kind of fram out of either wood or pvc pipes and make a "tree" shape, in fact, I plan on doing something similar myself for next year. If you place these kind of modules on somekind of flat surface, you will get a better visuality from the font than if you use the more regluar shaped leds, they will tend to "twist" into unwanted shapes.
I was planning on using some kind of thick wire and tie strapping the LEDs down to it. Do you think I'd still get the twist factor?
Is that version sold on a string with an IC?? I can't find any.
