2016 - Mega Tree Wi...
 
Notifications
Clear all

2016 - Mega Tree With Public Remote Control

74 Posts
21 Users
0 Reactions
60.4 K Views
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

Sure, I believe that would be doable for sure. Haven't done it before but it's possible to run a webserver on a RaspberryPI. Right now I was just using what I already had in place for other purposes. Also, I think it may even be possible to still host website wherever and dynamically update RaspberryPI programatically.


Reply
Posts: 141
(@jspiker77)
Estimable Member
Joined: 11 years ago

That is a good point, what you could do is still host it externally but you will still need to be running Apache or whatever on the PI that has a single "end point" page or service. This page could receive the command/post locally and process it. This way you are not exposing your IP address to the world, you could even run the web server on a non standard port to further disguise it. For example, externally hosted site receives the request from the viewer, it then connects to a secure web service or page on the PI that executes the script.


Reply
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

Some pics of progress. It's a good thing I still have 6 months to get this done since it has been challenging to find time! I have completed all the custom software that I will be using for the remote control so that's one thing that is done! I have finalized my plan for the tree structure and I have just about all materials needed to build it. The only thing I am still waiting for is pigtails from a holidaycoro pre-sale.

I have added fuses between the PS and E682 controller:

2016 05 16 21.48.09

I have been testing the pixel strings one by one and adding some extra waterproofing with Silicone II. It doesn't look pretty but I imagine it will do the trick:

2016 05 16 21.47.27

I have found it a lot easier to add the silicone II to the strings after they have been put in the strips. I also stretched the string out between two walls so I can just walk alone with my caulk gun (You can clearly see that this mega tree is keeping me from my other project/hobby of finishing my basement!!):

2016 05 16 21.46.16

I will be installing a new exterior GFCI outlet along with an Ethernet surge protector for my outside lighting needs. The GFCI will pretty much have an entire 20 amp circuit available to it which should accommodate all my future exterior illumination needs 😉

The outlet and cover

2016 05 16 21.50.36

The ethernet surge protector and I grabbed a water proof extension cord cover as well:

2016 05 16 21.50.19

Reply
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

My final decision on tree structure will be:
1) Base: Portable Hole II ( http://www.magicchristmasnews.org/portable%20hole%20ii.pdf ) with 1" -> 3/4" EMT pole

2) Topper: Boscoyo Mega Tree Topper Kit: http://www.boscoyostudio.com/products/index.php?main_page=product_info&products_id=41 (I have added 16 hooks to the topper so I can just hook the strips to it and not have to worry about zip ties) I don't have a picture of this but I will add one soon)

3) Base Ring: 1/2 EMT Conduit raised off the ground by about 2 feet with 6 supporting rebar rods (Adopted this design from youngschristmas: ). I have made one of the rebar supporting rods to prove that I could actually pull it off and it was pretty easy. Here is a pic (Note: I still need to chop of the sides of the tee so the EMT will fit through it easily. I am going to do that with my recip. saw):

2016 05 16 21.49.30

Here are the materials for the base,pole,ring etc.. (The copper pole is the ground rod I will be installing adding for the ethernet surge protector and the plastic conduit is for the outside outlet):

2016 05 16 21.45.22
2016 05 16 21.45.33

I will be creating a jig to bend the 10' piece of 1/2" EMT into a half circle and then I will be drilling holes in it to accept hooks with nuts for securing the pixel strings and providing an easy way to tighten them

A few more misc photos (I ordered 2 pig tails ahead of the pre-sale just so I could practice soldering them to the pixel strings):

2016 05 16 21.47.53
2016 05 16 21.48.29

Reply
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

Here are the pics of the boscoyo topper with the hooks I added:

2016 05 18 07.16.32
2016 05 18 07.16.37

And a look into the bin of parts I still need to assemble :sleepy:

2016 05 18 07.16.44

Got shipping confirmation for the pigtail pre-sale from holidaycoro so I will get wiring as soon as they arrive. Once everything is wired I'm going arrange all of the strings flat on the floor in the basement and give it a test run in the dark and see how it looks.


Reply
Posts: 317
(@spyder)
Reputable Member
Joined: 11 years ago

I would also be interested in this viewer interaction system finding it's way over to fpp. Great work, love it.


Reply
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

ty Spyder. As soon as I start running fpp for my display I will certainly bring over the viewer interaction system to it. I have looked into enough to know it is doable and will work well. At one point I came across a "jukebox" plugin available for fpp that had similar functionality to what I've done here for the xlights scheduler.


Reply
Setarcos
Posts: 169
(@setarcos)
Estimable Member
Joined: 12 years ago

I have it on my todo list to implement something similar for FPP by leveraging some of the new features CaptainMurdoch has been working on in the upcoming FPP v2.0 scheduler. Thus far it is still in the design phase, but you can see what I have in mind here.


Reply
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

I found time to build the portable hole 2. Pretty simple little project and I think will work great. There is one glitch however, a few days after I had built it I was walking through Home Depot and walked past the concrete I had bought. I grabbed 2 60lb yellow bags of Quikrete concrete, at least I thought it was concrete. As I was walking past the bags I had purchased the other day I noticed they said "Mortar"!! Ugh, I didn't even think to read the bag since I had bought lots of quikrete concrete in the past and the bags were always yellow. So I went home and pulled out the empty bags from the trash to see if I did in fact by mortar and sure enough I did. The mortar is "N" and will end up giving 750lbs per square inch vs 4000lbs for concrete. Big difference but I think it should still work for what it's intended for. I contacted Walter, who designed the portable hole, over at magicchristmas.org . He thinks I should be OK but I will be giving it the "rope test" after it cures for a month to make sure. The pole test is wrapping a rope around the pole connected to the anchored portable hole 2 and then pulling like crazy. Worst case I end up building another portable hole, best case I am good to go.
Anyway, here are some pics of my portalable hole 2 (mortar style :sly:)

2016 05 26 11.25.33
2016 05 26 13.19.26
2016 05 26 14.58.03
2016 06 01 17.19.09

I've also completed all the wiring (controller, pigtails to controller and pigtails to strings). I have the "tree" setup on my basement floor and I'm able to control it with the "remote control". I have 9 sequences so far for testing. I'll post pics of all that soon! I am trying to figure out optimal spacing the strings. I am using 3" vertical pixel spacing which seems like it is going to work great for me. Now I'm trying to figure out optimal spacing between strings at the base. Right now I have them setup at 7" apart at the bottom. I am only able to get about 20 feet away from the lights (and that is at an angle) and the top half of the lights looks awesome as far as animations and text goes. The bottom half still looks good but a bit tougher to make out certain animations etc.. However, I imagine at 70-80 feet it will look better. So, I won't be going any more than 7" apart. I think I may decide to go 6" apart when all is said and done. Either way, I am going to setup the 1/2" EMT conduit half circle base in a way that will accommodate both spacings.

Firing up the lights for the first time and playing a sequence with all strings hooked up blew me away. It was the first time I saw such a thing in person and it made me feel like all the time/$/effort spent thus far was well worth it! My wife said she felt like she was in Disney World (but that might partly be because I was playing the Electrical Parade...but still!)


Reply
Posts: 205
Topic starter
(@barlav)
Estimable Member
Joined: 11 years ago

Here are the pics of the setup I have going for testing and planning:

15 strings connected, one more to go

2016 06 03 22.47.32

The enclosure all wired up:

2016 06 03 22.47.38

This is the laptop and FM transmitter that will be running the show. The laptop has a broken screen so I re-purposed it for running my show. Since there is no screen I remotely access it install/run software.

2016 06 06 07.03.27

This is the stereo I'm testing the FM transmitter with. Everything is working great:

2016 06 06 07.03.36

Reply
Page 2 / 8
Share: