Notifications
Clear all

PixNode Net

8 Posts
5 Users
0 Reactions
4,784 Views
Posts: 98
Topic starter
(@ronaldpa2)
Estimable Member
Joined: 12 years ago
[#37795]

Anyone have one of these working ? Looks like an easy matrix to build ? Would like to see it in action. Although seems expensive when you have to buy 500 - 1000 nodes..


7 Replies
Posts: 44
 PIC
(@pic)
Trusted Member
Joined: 18 years ago
ImageUploadedByTapatalk1446439125.832692

First year trying it. I have two pieces going on my front columns of my house. Used 3/4" pvc as frame. Used Velcro straps and tie wraps to connect the two. I also want it to blend in so I painted it to match my columns. Appears to be working. Il
Btw...if I did it again i would have more horizontal rungs on my pvc to give more support to the matrix. Seems like it may sag a little in between rungs.


Reply
Posts: 51
 bpos
(@bpos)
Trusted Member
Joined: 12 years ago

Yes we have 3 under way.. They are nice. We built a 1/2 in square tube frame with 1 support in the middle. Then screwed it in with self tappers. Looks really nice and clean. pixels hold in well. So far so good.


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago
ronaldpa2 wrote:Anyone have one of these working ? Looks like an easy matrix to build ? Would like to see it in action. Although seems expensive when you have to buy 500 - 1000 nodes..

I would recommend the matrix from Boscoyo. Very sturdy and high quality.


Reply
Posts: 15
(@tiger62651)
Active Member
Joined: 12 years ago

I have one of this and my issue 3 of the side has very small area in which to attach to a frame. I made one of wood and not much to secure it well enough. then the machine which cuts the lengths cut my 48th column to short at an angle, Top row had just same length at other 3 sides but my bottom row had like 1/16th inch width so I had to loose one row just to attach to my frame. So instead of 24x48 mine is now 24x47. just got lights in and testing to make sure they work before i install them.


Reply
Page 1 / 2
Share: