Monster Matrix Pane...
 
Notifications
Clear all

Monster Matrix Panel Frame

13 Posts
7 Users
0 Reactions
8,613 Views
Posts: 61
Topic starter
(@abrianbaker)
Trusted Member
Joined: 16 years ago
[#37805]

I thought I might better post this question in its own thread...

Has anyone built a frame for the Boscoyo Monster Matrix Panel yet? I have 4 of them and plan on putting them flat on my roof.

2x4s for frame with bracing?

Any pics would be awesome!

Thanks


12 Replies
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

I am using 1 3/8 fence top rail with the "gate" corners you can get at Menards. ( http://www.menards.com/main/building-materials/fencing/chain-link-fencing/gate-elbow/p-2441046-c-5742.htm?tid=-6253560243155926888 ). By making the cuts so that the gate corners actually grip the panel, I've been able to pull the thing very taught and get a great panel. We simply zip-tie along the edges. (We had to "widen" the screw holes to accommodate the zip-ties, but it was easy and quick.)

Others have built a simple frame out of wood (usually 2x2). Like anything else here, there are some really good and varied ideas.


Reply
Posts: 61
Topic starter
(@abrianbaker)
Trusted Member
Joined: 16 years ago

Genius idea! Thanks!

Sent from my SAMSUNG-SM-N920A using Tapatalk


Reply
Posts: 24
(@viennaxmas)
Eminent Member
Joined: 14 years ago
ImageUploadedByTapatalk1441635551.940190

Welded aluminum frame... 4 x 12 foot each segment and pretty lightweight....


Reply
Posts: 327
(@thebaronn)
Reputable Member
Joined: 17 years ago
Viennaxmas wrote:

ImageUploadedByTapatalk1441635551.940190

Welded aluminum frame... 4 x 12 foot each segment and pretty lightweight....

that is very nice.
what type of LEDs are you using? Any more pictures?


Reply
Posts: 24
(@viennaxmas)
Eminent Member
Joined: 14 years ago

WS2812b strips. I have to dig for more pictures...


Reply
Posts: 24
(@viennaxmas)
Eminent Member
Joined: 14 years ago
ImageUploadedByTapatalk1444619168.837736

Video playing virtual Santa


Reply
Posts: 24
(@viennaxmas)
Eminent Member
Joined: 14 years ago
ImageUploadedByTapatalk1444619260.485671
ImageUploadedByTapatalk1444619292.422335
ImageUploadedByTapatalk1444619337.744992

Here are a few more -
One during building of the frames, one as tune sign and one from super bowl night...


Reply
Posts: 99
(@sulrich)
Estimable Member
Joined: 13 years ago

I ordered aluminum from metals depot online(i think) 2"x1" rectangular tube (1/16th wall) and bought from harbor freight "Alumiweld" and used a mapp gas torch welding the joints and gusset'ing all corners.. (perfect 90 degree angles) since it was my first time, it was a little sloppy. Took about 12hrs for all 4 frames. I offset frames 2/3/4 to allow for the first row to butt up against the neighbor frame so there wasnt an odd wide black, unlit area.

matrix frames2
matrix frames1
matrix frames

Reply
Posts: 24
(@viennaxmas)
Eminent Member
Joined: 14 years ago

Nice work! Seems like you are in the same boat I was... Had not touched a welder since college times.

I got my aluminum from onlinemetals.com and used a MIG welder.


Reply
Page 1 / 2
Share: