Notifications
Clear all

P10 module

9 Posts
3 Users
0 Reactions
6,518 Views
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago
[#52910]

Hi all, can someone please tell me which adapter do I need to run p10 panels 1/2 scan rate. Do I need a raspberry pi or a beaglebone.
Thanks

Sent from my iPhone using Tapatalk


8 Replies
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
waites wrote:Hi all, can someone please tell me which adapter do I need to run p10 panels 1/2 scan rate. Do I need a raspberry pi or a beaglebone.
Thanks

Sent from my iPhone using Tapatalk

I used to use a Pi but had flickering issues. There are only 3 outputs for the matrix using a Pi. I switched to a BBB and this adaptor and never looked back. Other folks use a colorlight for their panels. This adaptor has 8 outputs for the BBB.
http://www.renard-shop.com/home/60-octoscroller-cape.html

Sent from my SM-T710 using Tapatalk


Reply
Posts: 87
Topic starter
(@waites)
Estimable Member
Joined: 14 years ago

Thanks pmiller for your help, do you know if this is already assembled or a kit.
Thanks

Sent from my iPhone using Tapatalk


Reply
pmiller
Posts: 2795
(@pmiller)
Famed Member
Joined: 12 years ago
waites wrote:Thanks pmiller for your help, do you know if this is already assembled or a kit.
Thanks

Sent from my iPhone using Tapatalk

It says kit. It also says out of stock.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 691
(@stormyblade)
Honorable Member
Joined: 12 years ago

You can also get one from Dan Kulp that provides a couple extra features if you are willing to spend a few extra $$$ -- https://kulplights.com/product/octoplus/ On that web page is a link to Wired Watts, another vendor that sells the device.


Reply
Page 1 / 2
Share: