None lor pixel arch...
 
Notifications
Clear all

None lor pixel arch help please

5 Posts
3 Users
0 Reactions
2,858 Views
Ralph Deweil
Posts: 55
Topic starter
(@ralph-deweil)
Trusted Member
Joined: 14 years ago
[#26715]

Hey everyone, I need a little help if you don't mind, I need to learn how to put a arch in the viz thats not lor's i'm doing an arch that has 42 pixels and using sands E6804, I have the device working got the listener working fine I went into the viz to make the fixture and then wanted to cry. never thought I might have to find a work around for building something outside of lor, so im stuck and I have no idea what to do. or how to make it. could someone lend me a hand and in detail (step by step ) show me the way its my first non lor device. and I'm lost.

Thanks in advance.
Ralph


4 Replies
Jeff Millard
Posts: 1450
(@jeff-millard)
Noble Member
Joined: 19 years ago

Ralph,

It was a little complicated to make non CCR arches but here's how I did it: I made a new blank stage then I created a large CCR using the arch tool with the number of pixels I wanted. Then I created a single RGB bulb and placed it directly on top of the first CCR pixel, copy and paste that pixel and drag it over the top of the second CCR pixel. Repeat this until you have covered the CCR. Create a new prop and import all those bulb fixtures into it. Lock it. Copy it and export it. Then go back to your stage and import the prop, then resize it and place it where you want it. Assign the DMX channels using the prop wizard and you have your DMX arch. The fact that you have to go to this length to set the Viz up if you're not using CCR/CCBs is just another brick in the wall.

Jeff


Reply
Posts: 145
(@nkyspike65)
Estimable Member
Joined: 19 years ago

Smart-Pixel-System.

It works great for arches, mega-trees, straight lines, windows, and matrix.

http://doityourselfchristmas.com/forums/showthread.php?26335-Smart-Pixel-System


Reply
Ralph Deweil
Posts: 55
Topic starter
(@ralph-deweil)
Trusted Member
Joined: 14 years ago

Thanks and I have the program installed but i don't understand if my pixel count is 60 what do i do, i don't see a way to do a half an arch which is what i need to do?


Reply
Ralph Deweil
Posts: 55
Topic starter
(@ralph-deweil)
Trusted Member
Joined: 14 years ago

Hey bud. you said it my friend. what a pain in the you know what. hope all is well and hope to talk soon.


Reply
Share: