Waterproofing LED s...
 
Notifications
Clear all

Waterproofing LED strings.

3 Posts
3 Users
0 Reactions
1,841 Views
Posts: 50
Topic starter
(@dw377)
Trusted Member
Joined: 3 years ago
[#58163]

I just spent the day cutting the JST connectors off LED strings to replace them with waterproof 3 pin plugs and sockets. I have no doubt that the connectors are now waterproof and I have done my best to protect the soldered joins with heat shrink tube and liquid insulating compound. It is a concern that I have replaced one source of water ingress with another. It is also a real faff to do and I have many more waiting. What do other people do to protect connectors from the elements?


2 Replies
Aurbo99
Posts: 2804
Moderator
(@aurbo99)
Member
Joined: 19 years ago

dielectric grease on every connection point that might become exposed to the weather including inside the new waterproof ones.

Just like "Frank's Red Hot Sauce" ,

1716588778218

Reply
rayhjr
Posts: 972
(@rayhjr)
Noble Member
Joined: 12 years ago

Yeah that dielectric grease is really good stuff, I use it also.
But I install the 2, or 3pin automotive connectors.

Two things I always consider with this.
First I want to keep water off the wires so they do not corrode.
Second, I don't want water, which is conductive, to get between any of the pins. That's when bad things happen.
And that's what the grease does so good, keeps water out. Good stuff! (y)


Reply
Share: