Hey all. So Ive been looking at making my own LED sets. As in, buying a spool of 500' either 6" or 12" spacing and cutting them to the lengths I need. But I do have a few questions as I keep reading mixed things about them.
First, with the 500' long spool, Can I cut these down to any size I want and add a male and female plug to them? I understand its a 2 stand wire, and I have to match up the Neutral and the hot to match both ends and my house hold plugs..
Second, slightly goes with the first question. Is there a certain length where I need to add in a resistor? I noticed some sites say you do, some say you dont. The bulbs I'm looking at are
.8 watts / .007 amps per bulb.
My longest string will be 52' and my shortest would be 10'
Any other info would be great. Thanks
Sorry, have to answer your questions with a question.
Are you talking about AC LEDs, or DC LEDs? (I don't want to assume here.)
If DC LEDs, are they all one color? (Again, no assumptions here.)
newlifer89 wrote:Hey all. So Ive been looking at making my own LED sets. As in, buying a spool of 500' either 6" or 12" spacing and cutting them to the lengths I need. But I do have a few questions as I keep reading mixed things about them.First, with the 500' long spool, Can I cut these down to any size I want and add a male and female plug to them? I understand its a 2 stand wire, and I have to match up the Neutral and the hot to match both ends and my house hold plugs..
Second, slightly goes with the first question. Is there a certain length where I need to add in a resistor? I noticed some sites say you do, some say you dont. The bulbs I'm looking at are
.8 watts / .007 amps per bulb.My longest string will be 52' and my shortest would be 10'
Any other info would be great. Thanks
I think it really depends on the product as there isn't one specific standard. I can tell you exactly what a guy I know used to do (he showed me the ropes). Don't know if you've ever heard of "vampire plugs". They are basically Christmas light items that are used to make custom strings. The main functions of these regardless of what kind of item you are adding, is that there is two very sharp "teeth" in them, one for each wire in the string. You run the electrical string, insulation and all into the item so that the teeth are contacting the wire, then there is a cover that slides on over the wire and pushes the wire so the teeth pierce the insulation and contact the wire, along with sealing it and holding it in place. Same concept as a "T-tap" connector. They sell all sorts of pieces for this, female ends, male plug ends, in line sockets for the lights of various bulbs and sizes (so that you can have any spacing you want along with exactly the start and terminal points you want, no slack. The ones he used and I have are meant for spt-2 wire, and you usually have to make sure they are the correct wire. I've used these both for making custom strings AND for making custom length extensions/cable connections between a controller and the light string. Never ever had a short or an issue with them.
newlifer89 wrote:Hey all. So Ive been looking at making my own LED sets. As in, buying a spool of 500' either 6" or 12" spacing and cutting them to the lengths I need. But I do have a few questions as I keep reading mixed things about them.First, with the 500' long spool, Can I cut these down to any size I want and add a male and female plug to them? I understand its a 2 stand wire, and I have to match up the Neutral and the hot to match both ends and my house hold plugs..
Second, slightly goes with the first question. Is there a certain length where I need to add in a resistor? I noticed some sites say you do, some say you dont. The bulbs I'm looking at are
.8 watts / .007 amps per bulb.My longest string will be 52' and my shortest would be 10'
Any other info would be great. Thanks
I know with the ones I've made, I've used incandescent, led and strobes. The beauty of that, is you just get one big spool of regular wire without committing to a specific spacing or use
algerdes wrote:Sorry, have to answer your questions with a question.
Are you talking about AC LEDs, or DC LEDs? (I don't want to assume here.)If DC LEDs, are they all one color? (Again, no assumptions here.)
I thought the same 🙂 need to ask a question to even think of providing any answer 🙂
