LED Conversion - St...
 
Notifications
Clear all

LED Conversion - Stumped

19 Posts
11 Users
0 Reactions
6,718 Views
Protege94
Posts: 556
Topic starter
(@protege94)
Honorable Member
Joined: 10 years ago
[#45292]

I have 42 candy canes (the ones that are roughly 24" tall and in a string of 3) that are incans currently and I am wanting to switch them over to LED.

They each currently have around 15 bulbs each with about 2 feet of wire in between for spacing. Has anyone converted these to LED? I was thinking about trying regular LED string lights but a 50 count is too long to stuff inside. I also considered LED rope light but havent found a good source that would allow me to run 110v directly to each CC instead of having a DC box of some sort.


18 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

A string of three Canes with 15 lights in each = 45 lights. You could stuff an extra two lights in the first and second cane and a single extra bulb in the third cane. Then just extend the wire between the LEDs to get them to reach the next cane in line.


Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago

There is a guy here that did it and posted a how to. I think it was 18 red LEDs using a ws chip to control them. So you could dim and on and off each led. But not pixels as it was only one color led. Blickenfer or similar I believe.


Reply
TomL8345
Posts: 1356
(@toml8345)
Noble Member
Joined: 15 years ago

There are instructions in the Wiki for converting to Rope Light, http://www.doityourselfchristmas.com/wiki/index.php?title=Candy_Cane_Upgrade_to_Rope_Light . I did that my first year, but I was not very happy with the results as they were too dim compared to the rest of my display, and I ended up replacing them in my 3rd year. If you want to use LED strings, you need to find some of the LED String shortners that were sold on this site as a Group Buy a couple of years ago. I would expect that to be more acceptable than what I did with the rope light. I did finally replace my Candy Canes with some I built out of Coro and Pixels.


Reply
boyelroy11
Posts: 757
(@boyelroy11)
Prominent Member
Joined: 17 years ago

Go pixels. Make them whatever length you want 🙂 Bullets fit right inside the tubes:

http://williamschristmaslights.com/wp-content/uploads/2016/05/20151017_184950.mp4

Edit: And I will just say that I hate being that guy that says 'just use pixels', lol. I use incans, leds, and pixels, but was super happy with the pixels in these.


Reply
Page 1 / 4
Share: