I believe the OP wants to stay at 110v AC.
algerdes wrote:I believe the OP wants to stay at 110v AC.
Ideally yes, as I want to use these with the LOR controllers. Im not sure how many channels I will run for these and that is why I want to convert over to LED.
I know they sell LED strips that are cut-able, but I am unsure how to hook each one up to an extension cord. I could probably use LED rope lights as the diameter is pretty large but that goes back to how so I connect each one to power since only one end has a power hookup.
Protege94 wrote:Ideally yes, as I want to use these with the LOR controllers. Im not sure how many channels I will run for these and that is why I want to convert over to LED.I know they sell LED strips that are cut-able, but I am unsure how to hook each one up to an extension cord. I could probably use LED rope lights as the diameter is pretty large but that goes back to how so I connect each one to power since only one end has a power hookup.
You don't. Strips are almost always DC 5v or DC 12v. I haven't seen any 120v strips. So if thats your goal, then strips are out. Need to focus on loose LED strands.
Wolfie wrote:You don't. Strips are almost always DC 5v or DC 12v. I haven't seen any 120v strips. So if thats your goal, then strips are out. Need to focus on loose LED strands.
I wanted to reach out before buying 40 strands of mini lights, incase someone had a DIY for the strips.
The only option is to run them on DC which involves a DC power supply. Since you expressed interest in sequencing them as AC strands, then going with LED strings is the way to go.
Strips would look different than the led strands would in the canes. By going with the strands you maintain what they look like now with a slight nod to old school look.
There are ways to shorten led strings. However, you need the strings to start with and this may not be the best time to be shopping for them. Stuff is bing put out for halloween and is going to be premium priced. After Christmas (late Dec/early Jan) you can pick up strings of lights at Walmart, Lowes, Home Depot, etc that are extremely cheap. I would do a count and see how many incans are in the canes now and do some shopping (not buying) over christmas for led strings that are similar in count and length. If you can find ones of similar count and length, the you won't have to cut and shorten them saving quite a bit of headache and time. You may want to roll with the incans this year and buy up the cheap LED strands after christmas and then do the conversions over winter for next year. Could save you quite a bit of money and give you something to work on in the bleak winter months.


