This weekend I found 40 candy canes at a garage sale for $15. I couldn't pass them up. They are currently incandescent lights but I want to convert them to LEDs. What would be the easiest way to convert these to LEDs? Would it be with cut down LED mini light strings or should I use LED strips? How hard is it to make custom length LED strips and then attach a 2 prong plug to them?
I am going to be using these with an LOR controller. The candy canes look like the attached photo.
Guess it depends on what sort of LED you want to put in it and what you want it to look like. If you are talking RGB leds or pixels, thats a different scenario than plain LEDs.
Wolfie wrote:Guess it depends on what sort of LED you want to put in it and what you want it to look like. If you are talking RGB leds or pixels, thats a different scenario than plain LEDs.
Just plain white LEDs as the tube itself is translucent red.
I basically just want it to light up the whole length of the cane as it would with the incandescent. I am trying to go 100% LED to keep energy usage as low as possible.
If you are wanting to use white LED strings, then you may want to check out this: http://doityourselfchristmas.com/forums/showthread.php?38815-Super-String-Shortner-and-Full-Wave-Converter-2015-Group-Buy&highlight=string+shortener
I don't know if there are plans for another GB, but you could ping OP of that thread. I bought several of these last year but haven't gotten around to using them as of yet (not sure if I will).
you can grab an all white LED strip. Runs on 12v and can be cut on 3 led boundary. Something like this: http://www.ebay.com/itm/5M-DC-12V-3528-SMD-300LEDS-LED-Flexible-Fairy-Strip-Light-Rope-Lamp-Cool-White-/152204916215?hash=item23701eb5f7:g:IgwAAOSwAuNW7L0w



