Qbert-PNS wrote:
Thanks again I appreciate your input.
No problem. Also, you should consider going into your user profile and including a location (doesn't have to be as specific as mine) ... sometimes you might post a problem and someone sees that you're close by and can say, "Hey, I'll just come over and show you."
\dmc
WILCO
Awesome... Thanks again.
dmcole wrote:Since I was trying to dim individual straw-hat type LEDs, my technique won't work for you (if you're curious -- http://www.pacificalights.info/index.php/tech/21-Lynx-MR16.html -- third from last paragraph). But among my other thoughts was to buy white or clear corrugated plastic sheets (aka Coroplast), cut them into strips and mount them on standoffs on the frames. The standoffs would provide space for the focus of the LED to dissipate.
Coro on stand-offs would work. There is also another way to do it - point the LEDs backwards so they shine onto a diffusion surface behind the LEDs (this would work for straw-hats as well as other LEDs as long as they can be aimed backwards). Then they act like miniature flood lights. There's a diagram on page 10 + 26 in this article that shows an example:
http://downloads.eshepherdsoflight.com/Howidid-DumbRGBPixelGrid.pdf
If the window frames are light colored, they could be used to diffuse the light.
don
What did you end up doing for this? I'm trying to diffuse the light on my window frames which are currently 1/2" PVC with LED Strips zip tied to them.
I was thinking about trying Coro or slipping some Poly Pipe over them.
I run my pixels inside this Sharkbite PEX tubing. Most Home Depot stores stock it. You can choose 1/2" , 3/4" or 1" diameter. It really looks great at night! You can remove the ink labels with acetone or any type of paint solvent. Comes off with one wipe.
http://www.homedepot.com/p/1-in-x-10-ft-White-PEX-Pipe-U880W10/202033021
