power adaptor issue...
 
Notifications
Clear all

power adaptor issues

9 Posts
3 Users
0 Reactions
14.2 K Views
Posts: 46
Topic starter
(@timpwk)
Trusted Member
Joined: 14 years ago
[#44312]

I have had 3 of the ac/dc power adaptors that most of the newer LED inflatables use fail this year. Was not a huge issue for me as I usually buy several inflatables after christmas for 50-75% off for replacement parts, but was wonderng if anyone else is having issues with them failing. I place mine on plastic stakes so they are never in ground contact.


8 Replies
Posts: 17
(@rcktpwrd)
Active Member
Joined: 12 years ago

I had one 'fail' a few years ago. I figured if it was already not working I couldn't mess it up any worse, so... I popped the case open and found small amount of moisture in it, I let it dry out. Then I cleaned off the corrosion that built up, some was bridging some of the parts of the circuit board. After that it worked perfectly again. When I put the case back together I added some silicone to seal it up.


Reply
Posts: 46
Topic starter
(@timpwk)
Trusted Member
Joined: 14 years ago

Thanks. I will look into that, it makes a lot of sense!! We have had a very "wet" few weeks with many days of light rain and misting......................


Reply
Posts: 17
(@rcktpwrd)
Active Member
Joined: 12 years ago
timpwk wrote:Thanks. I will look into that, it makes a lot of sense!! We have had a very "wet" few weeks with many days of light rain and misting......................

Wondering if you had a chance to try and fix the inflatable yet?


Reply
Posts: 46
Topic starter
(@timpwk)
Trusted Member
Joined: 14 years ago

Tried what you suggested, they did have moisture on the inside. I dried them out, etc. but they did not work.


Reply
Page 1 / 2
Share: