Notifications
Clear all

Using Rope Lights

13 Posts
6 Users
0 Reactions
10.5 K Views
toodle_pipsky
Posts: 1285
Topic starter
(@toodle-pipsky)
Noble Member
Joined: 19 years ago
[#4053]

Just looking around the place - can see reference to people doing it, just not HOW they did it. Now I know by reading the SSR section that I need to change resistors as per the sticky on gate resistor values - so that's covered. Anything else to change or include - for example I did see some discussion about heatsinks.

So how do I remove the controller from the rope light - is it the same principal as other lights? And again, same principal for connecting the lights to the SSR?

They're probably stupid questions - but I didn't want to go chopping up my 30m long ropelight only to find I messed it up or did it totally wrong from the start.

Thanks.


12 Replies
rlilly
Posts: 993
(@rlilly)
Noble Member
Joined: 19 years ago

I've controlled 36" sections of rope light with the SSROZ board with no issues.

If I understand the question, you have a separate controller attached to the rope light? If so, remove the rope from the controller and attach direct to the relay.

My rope light is 110v AC powered. Don't know if there are aussie issues to take into account.

I suggest talking to Micheal Sulivan on rope light usage in Aussieland.


Reply
Posts: 22
(@magott)
Eminent Member
Joined: 19 years ago

Are you using 240V ropelight or 24 etc? What brand is the rope light and controller. If there 240v Ive removed a bunch of these a few years ago but will check again exactly how i connected them back up and get back to you. The obvoius warnings always apply with 240V - "Be weerrryyy Careful" .


Reply
toodle_pipsky
Posts: 1285
Topic starter
(@toodle-pipsky)
Noble Member
Joined: 19 years ago

Yeah it's 240V - that's why I thought I would ask before diving in and chopping things up. I wasn't even going to bother and just leave the ropelight blink away doing it's own thing, but now . . . .
I'm at work at the mo (working ultra hard) but I'll post a pic of how the controller's connected when I get home.
Thanks guys for the tips so far.


Reply
Posts: 22
(@magott)
Eminent Member
Joined: 19 years ago

I had a look at the rope lights id removed the controllers from a few years back and all were standard three wire chasing types with the common black box controller with eight functions. These all had three wires leading to the ropelight (Brown,Aqua and Black). All i did was connect the Black to your Neutral and the other two to the active that your providing to the ropelight. Im assuming your using an extension lead or something. In these the Neutral is generally Black or Blue and the active Red or Brown. Again make sure everything is disconnected before doing any work and use proper connectors to join the wires before testing. I found the best way was to purchase a small Junction or J box from "Bunnings" and put all the connections safely inside. If this is to be used outside this will not be waterproof and as everyone knows 240V and water dont mix very well. You will need to seal it and or protect it from water.
If you are at ll unsure or uneasy track down someone with electrical experience to do this. Better to be safe than sorry.
It isa lso possible to modify these controllers to remeber their settings once their turned off so that you can select a particular style of chase and have that used everytime you turn the ropelight on. The modification while simple in pinciple requires a fair bit of mucking around to do and is again not for the inexperienced. We can add a short discussion on this to the melb mini agenda as a few people attending are interested. Cheers


Reply
Page 1 / 3
Share: