PIC programming usi...
 
Notifications
Clear all

[Sticky] PIC programming using MPLAB software

14 Posts
8 Users
0 Reactions
57.8 K Views
derekbackus
Posts: 565
(@derekbackus)
Honorable Member
Joined: 15 years ago

Thank you! These videos helped A LOT!


Reply
Wayne J
Posts: 7789
Topic starter
(@wayne-j)
Illustrious Member
Joined: 19 years ago
derekbackus wrote:Thank you! These videos helped A LOT!

Ah, glad to be of help! Welcome to the club!


Reply
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Wayne, +1 on a great job. Have you considered doing videos with the latest "X" version of MPLAB from Microchip? It has some interesting characteristics that make it problematic for recreating binaries for some of the code here and a "how to" would be very helpful. For example, I've found that it is VERY particular about you having the CODE directive in your code that apparently was optional on previous versions. I've also had some issues trying to compile the FAST code and have it work that I cannot figure out.


Reply
Wayne J
Posts: 7789
Topic starter
(@wayne-j)
Illustrious Member
Joined: 19 years ago
CaptKirk wrote:Wayne, +1 on a great job. Have you considered doing videos with the latest "X" version of MPLAB from Microchip? It has some interesting characteristics that make it problematic for recreating binaries for some of the code here and a "how to" would be very helpful. For example, I've found that it is VERY particular about you having the CODE directive in your code that apparently was optional on previous versions. I've also had some issues trying to compile the FAST code and have it work that I cannot figure out.

I have thought about it, many times in fact. I choose not to do one simply because MPLABS is constantly updating and changing. I personally think and made a note in the videos page, that using the MPASMWIN software to create a .HEX file is the best method anyways. It is easier simply put. Then just load up the programmer software when needed.
I will however, add a video of the updated software if anyone wants to make one. 🙂


Reply
gmbartold
Posts: 116
(@gmbartold)
Estimable Member
Joined: 16 years ago

The video's are excellent. I purchased a microlab pickit 2 last year as a backup but never learned how to use it until now. I would like you guys to think for a minute that you know nothing about electronics & programming & software & code & etc. etc. You open the box and look at all the cool stuff. You have 3 disks, MPLAB v8.60, PICkit Starter Kit, and a small disk from Joshua 1. Next I find a piece of paper that says IMPORTANT INFORMATION "Read First". It basically says to go to microchip.com for the latest software. I go there and spent an hour searching for the MPASMWIN & PICKIT 2 Program, finding only frustration. Little did I know that the MPASMWIN program was incorporated in the MPLAB IDE program. I too, didn't know where to put the jumpers on the board but thanks of Ole Man Mike's pdf in post 1 on his first page told you about the jumpers. I would like to suggest that links to the software be added before the video's or at least inform an inexperience person (me) what software to load into his computer. For many of us, programming a chip is a new, first time experience.

So...............there I was following the video,s exactly as illustrated. Hit the pause button many times to make sure that I was doing it right. Finally the chip was verified. Now the big test, I installed the my prize chip into a RenSS16 controller. Turned it on and..................it worked! :yay: I sat back in my chair with a sign of relieve and said: That was easy!
Thanks for the video's

BTW in the Wiki the two links in this line needs updating "This is a series of videos on "How to program a PIC" using a Microchip Programmer hosted by Do It Yourself Christmas Forum"
Regards,
Gary


Reply
Page 2 / 3
Share: