The Archives linked above ( http://www.doityourselfchristmas.com/forums/showthread.php?t=9 ) have a how-to on salvaging a prefab 8-function controller and hacking it to control light strings. But there are lots of cautions and caveats about the power limits they can handle. I'd like something more robust with the same functionality. I've found a few pre-fab for multi-hundreds of dollars, not in my budget this year.
Are there any DIY controllers like these that can operate stand-alone, i.e. don't require a computer? I'm not going to be syncing to music, and do want dimming, fast/slow chasing, "waves", etc. Thanks.
More Googling led me to a couple DIY 5- and 8-channel chasers. They're availble preassembled or in kit form. No dimming, so only a partial solution:
http://www.rpelectronics.com/Default.asp?Main=/English/OnlineCat.asp?Menu=/English/Content/Categories/CatM_95.asp%26Detail=/English/Content/Items/UK580.asp
http://www.electronickits.com/kit/complete/ligh/canck289.htm
I also found a psuedo-DIY using a stand-alone PLC module. The elctronics are pre-fab, you just add all the dongles. Again, no dimming, but it looks like it's more flexible:
http://zedomax.com/blog/zedomax-diy119-make-christmas-light-controller-in-5-minutes/
i have an 8-function controller i'd like to use on a small mega-tree. i have four light strings with 50 red lights on each and two lengths of green that i cut in half (i think there were 100 lights on each before shortening them). i'd like to put two of the lengths (or 100 lights) on each channel of the controller and run it in random mode. i looked at the how-to in the archives but it didn't really cover power draw or the maximum number of lights recommended for use on the controller. i have 4-5 controllers, but i don't want to use two controllers since there's no way to sync them.
I have a couple of old controlers that are three channels with 100 lights on each. I opened them up and found the output device was a small triac that was rated to .8 amp continuous so 100 lights was about it. A older controler I had was also three channel with 50 lights on each channel. This one used SCRs and they were only rated at .5 amp so 50 lights was all it could handle.
You might want to try and open up the controler and see if you can identify the output device. Run the numbers on the output device threw a search engine and see if you can get a spec. sheet on it, that will let you know what the max load for that device is.
Of course since this is DIY here, if it can not handle the load you are trying to run you could always make up your own SSRs and use the controller to drive them.
one controller didn;t have any markings on the transistor, the other said ML 1225. found a spec sheet that lists the "On-State Current" at 0.8 amp. i'll make sure each string has no more than 100 lights, but it looks like i'm good to go.
thanks!
(the controllers are four channel and originally had 35 lights on each - red, green, blue and yellow)
