Pixel PCBs
 
Notifications
Clear all

Pixel PCBs

33 Posts
14 Users
0 Reactions
12.5 K Views
Posts: 386
 JEC
Topic starter
(@jec)
Reputable Member
Joined: 19 years ago
RavingLunatic wrote:Will this be your standard 3 color pcb?

No, I added spaces for white and amber as well. 6 LEDs each. Will post a schematic & board layout shortly.


Reply
Posts: 0
(@avatar-it)
Joined: 1 second ago

i am interested in finding out more.


Reply
Posts: 386
 JEC
Topic starter
(@jec)
Reputable Member
Joined: 19 years ago
scorpia wrote:i am interested in finding out more.

Update - the board has been routed but I haven't posted any pictures yet.

It's slightly larger than the SMT pixel board.

* All through-hole parts
* Can contain 30 5mm (T1 3/4) LEDs - 6 each of red, green, blue, white and amber
* Also includes 3 x 3-pin headers for driving servo motors
* Servo motors can be driven in addition to LEDs - they're on separate pins
* Includes header for (optional) servo power supply
* Includes footprint for (optional) heavy-duty regulator for servo power
* Includes footprint for small regulator for processor
* RJ45 for input and daisy-chained output

Sorry I've been so slow - I've been tied up with other projects this week.

JEC


Reply
Posts: 0
(@avatar-it)
Joined: 1 second ago

do the servo headers mean that yourself or someone else is working on Modifiying the code to work with the servos?

Peter


Reply
kostyun
Posts: 2178
Guest
(@kostyun)
Member
Joined: 20 years ago

I'll take 2 (or maybe 5 depending on the final cost)!!!! Do these use the standard DMX RJ45 or the injected version?


Reply
wbuehler
Posts: 622
(@wbuehler)
Honorable Member
Joined: 19 years ago

All through hole you say? Cool

Thanks

Let use know when we can order I take 5 PCB's

Bill


Reply
Posts: 386
 JEC
Topic starter
(@jec)
Reputable Member
Joined: 19 years ago
scorpia wrote:do the servo headers mean that yourself or someone else is working on Modifiying the code to work with the servos?

Peter

They mean the potential is there! Haven't had time to sit down and write anything yet.

DMX ---> servo isn't difficult, nor is DMX -> dimming LEDs. Combining the two smoothly may be a challenge.


Reply
Posts: 386
 JEC
Topic starter
(@jec)
Reputable Member
Joined: 19 years ago
fkostyun wrote:I'll take 2 (or maybe 5 depending on the final cost)!!!! Do these use the standard DMX RJ45 or the injected version?

Currently the injected version. The servos were added as an afterthought. I suspect that powering them through long lengths of thin-gauge network cable would cause a lot of problems. That's why I added a 'servo power' input to the board, separate from the LED drive circuitry.

The 'injected power' RJ45 pinout that I've been using is so radically different from anything else out there that I'm inclined to leave it be. I think that switching to the regular USITT RJ45 pinout *and* injecting power would cause lots of problems.

Thoughts?


Reply
Posts: 386
 JEC
Topic starter
(@jec)
Reputable Member
Joined: 19 years ago

Schematics and board layout can be found here:

http://www.response-box.com/rgblights/2007servosix.shtml

(Note! For some reason the forum won't accept attachments larger than 19 KB. That's silly. So I posted them elsewhere.)

The board prints larger than actual size, which is 2.35" x 2.80".

The LEDs are in this pattern:

R G B W A R
G B W A R G
B W A R G B
W A R G B W
A R G B W A

Should have pricing shortly. 10 day turn on the boards once they're ordered.

Changes: No regulator on-board for servo power. Provide it yourself on the included header. It's probably too much current for the CAT5 cable to handle.


Reply
Posts: 35
 srm
(@srm)
Eminent Member
Joined: 19 years ago

Hi JEC,

I'd like to order 10 - 15 PCBs, if thats ok

regards,

stephen

edit: added more to order.


Reply
Page 2 / 4
Share: