Shimmer/Twinkle
 
Notifications
Clear all

Shimmer/Twinkle

8 Posts
4 Users
0 Reactions
4,998 Views
Posts: 51
Topic starter
(@hakanl)
Trusted Member
Joined: 14 years ago
[#24325]

Hello,

I'm trying to implement Shimmer and Twinkle effects that mimic LOR in my http://www.animatroller.com , does anyone have suggestions on how those effects are generated? I've looked at Vixen's Twinkle and it seems to be just random pulses that fade up and down. Any suggestions on where to find?

Thanks,
/Hakan


7 Replies
Posts: 135
(@ptone)
Estimable Member
Joined: 16 years ago

I'd also love to come up with some "common" meanings of some effects for those of us implementing them in different systems.

Naming things can be hard, so perhaps a lightweight effects description format could be used on a wiki page eventually?

I first implemented twinkle as 6 params:

duration_off_min, duration_off_max, duration_on_min, duration_on_max, intensity_min, intensity_max

It would then create an cycle generator that would vary the on and off cycle based on random selection from the above params

This was a nice effect - but I wouldn't call it twinkle with most values. To get a twinkle look, I think think will require having the light stay on most of the time, and just dim very briefly for a brief time randomly. Done over a string of lights, this should give a twinkle appearance.

Shimmer to me implies a fast pulsing without ever going dark - I have this working with my more general purpose pulsing effect.

I know your specific question is how LOR does it - and perhaps we should just respect their precedent - but there is a window here among those who are implementing newer software (including HLS, Vixen3 etc) to come up with some common meanings.

Just shot a quick video of my twinkle effect first drafts (this is a realtime generated effect):

http://www.youtube.com/watch?v=gnaio3U2lN8

-Preston


Reply
Posts: 51
Topic starter
(@hakanl)
Trusted Member
Joined: 14 years ago

That would be very good to have definitions like that. I was looking at the Twinkle effect in Vixen3 and it seemed to be more off than on (default settings at least) and fade up and down at random times. The reason I asked about LOR was because I wanted to emulate their effect when reading in LMS (LOR format) files, so I wanted it to look as close to the LOR hardware as possible, even if I'd use DMX, etc. It seems shimmer is a 50% duty-cycle timed by the AC duty, but not sure if I can emulate it with 60hz on/off.


Reply
Posts: 1249
(@jstjohnz)
Noble Member
Joined: 17 years ago

It's difficult to emulate the LOR effects via DMX because LOR refreshes 120 times per second whereas DMX is limited to about 40.


Reply
Posts: 51
Topic starter
(@hakanl)
Trusted Member
Joined: 14 years ago

Oh, I see, that's fast. But that would really just matter for shimmer right? Since twinkle-effects doesn't seem to have that fast transitions anyway. 120 times a second, does that mean they change effect parameters mid-cycle in the AC cycle, on the zero crossing? That's pretty good. I guess it would only be able to do that with their native commands (fade, shimmer, twinkle) since their data rate is slower than DMX, right?


Reply
Page 1 / 2
Share: