Renard board timer ...
 
Notifications
Clear all

Renard board timer control software.

28 Posts
5 Users
0 Reactions
12.2 K Views
bolwire
Posts: 246
Topic starter
(@bolwire)
Reputable Member
Joined: 17 years ago
[#31144]

Download Links:

Updated 914/2014

32 Bit: http://db.orangedox.com/rIfQJyvIGnZEG9NTZr/Bliksem_10_setup_x86.exe
64 Bit: http://db.orangedox.com/YlFystEgVJzzb90IYq/Bliksem_10_setup_x64.exe

I have been working on a new piece of software for controlling renard boards with timing software, which will allow folks to use the boards (up to 16 ch), as a programmable timer.

Last year I was left with the feeling that I should be able to control my tune to sign, FM XMIT, all that nice stuff from my computer, with a schedule. I just don't like doing it with wall timers.

Anyhow, I will use one of my spare Renard SS16's as my timer this year. The plan is to use the board to drive a relay for any load that would be a burden on the Triacs. And in some cases, the ability of the triac may be
all that is needed.

With a decent RS232 16 channel relay board from a company that specializes in this field starting at over $500, and the software to control it being over $200, I came up with what I believe is a better solution.

One key feature is that the standard renard firmware does not have to be modified.

I do plan to have some pcbs made up at some point that are designed for this purpose, but in the mean time, the renard boards will work for me.

Here are some images of the software as it stands right now. Just a few finishing touches to it need to be completed. I do plan to make this software available for everyone who would like to use it.

Comments ? Questions ? Suggestions ?

Thank you,
James

control
schedule

27 Replies
Posts: 317
(@dvc2013)
Reputable Member
Joined: 14 years ago

I think this is a great idea. I'll be watching here for more info.


Reply
T.D.Sutton
Posts: 445
(@t-d-sutton)
Honorable Member
Joined: 17 years ago

Brilliant idea, I will certainly be interested in using it when you get the software "polished". Question though, do you anticipate that it would run through a USB / Serial converter, and what baud rate do you plan to use ?

Terry


Reply
bolwire
Posts: 246
Topic starter
(@bolwire)
Reputable Member
Joined: 17 years ago

It should run on any setup that your renards will run on right now, and the baud rate can be set as needed in the serial port setup.

Sent from my PantechP8010 using Tapatalk


Reply
Posts: 317
(@dvc2013)
Reputable Member
Joined: 14 years ago

I can't wait to test this out.

Is this for serial only, or will this work with DMX as well ???


Reply
Page 1 / 6
Share: