Pixel tree freezes
 
Notifications
Clear all

Pixel tree freezes

10 Posts
4 Users
0 Reactions
3,297 Views
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago
[#43284]

I was testing my 180 pixel tree and sometimes it freezes, usually on all white and only half the tree. I have my whites turned back to 85%. I have 16 strings of 50 12 volt pixels and each string is running off a E682 with 2 power supplies. The lines from the controller to the tree are only 5 feet long. I'm thinking it could be a data issue. Any ideas?

Sent from my SM-T710 using Tapatalk


9 Replies
Posts: 672
(@pixelpuppy)
Honorable Member
Joined: 12 years ago

Need more details. What are you using for show player? Falcon Player or PC? What is the network topology between the player and the controller?


Reply
pmiller
Posts: 2795
Topic starter
(@pmiller)
Famed Member
Joined: 12 years ago

I'm networked to my Google Fiber box and then into a 16 channel network switch. I'm using Vixen 3 on a brand new Dell 3650 with 12 gigs ram. I'm hoping to get FPP going using a Raspberry Pi.

Sent from my SM-T710 using Tapatalk


Reply
Posts: 1049
(@phrog30)
Noble Member
Joined: 12 years ago

Are you unicast or multicast? If unicast, are all controllers connected and running? Is there anything else running on your computer that might interfere, LoR for example?

Sent from my Pixel using Tapatalk


Reply
Posts: 825
 DanJ
(@danj)
Prominent Member
Joined: 13 years ago

why don't you try some E682 test patterns and see if you get the same response. That might help narrow down what you need to fix... If Vixen can output test signals, use Vixen to run some tests into your E682. Or you could always use SACNView to generate some test signals.. This is the weird kind of stuff I have gotten when I have had some data issues.. But usually there is some flashing/intermittent behavior involved too.


Reply
Page 1 / 2
Share: