I wouldn't say its a requirement but more of a best practice. It's fairly universal on most productions. Most production companies nowadays err on the side of safety. Touring and staging is a business with a fairly high hazard environment. Everything is temporary. Cables and such running everywhere. Venues and situations are almost always different and unfamiliar. And believe it or not, the business isn't very well regulated. Laws and codes very widely by jurisdiction and often due to the brief nature of a tour stop, individual shows are rarely inspected.
All that said though the most unpredictable thing in a show is people. Both performers and technicians. And all too often they don't wait for the show to be over before the booze starts flowing and that certainly doesn't help either.
Luckily I'm on the corporate event side of the business. The schedule is generally more generous and because they work very close to the business clients, crew behavior is typically much more tame
Its top secrect people! Cna't tell you.
As a former concert lighting designer and someone who has attended TSO shows in the last few years I can tell you that the show is run manually (no SMPTE or MIDI). While the board automates many of the effects (I think they are using a GrandMA these days) the transitions are fired manually by the board op. This is most if not all concerts are done.
As far as click tracks and prerecorded tracks, I've dealt with both. The click track and audio tracks were always for guest artists. For example if the local orchestra wasn't great, we would remove them from the house mix and add in the prerecorded track. Click tracks were meant to keep everyone together, although a good drummer will do that for you.
As far as SMPTE and MIDI this is usually used for show control, not often mixed with live performances. Disney, Vegas, and static displays use SMPTE to avoid having to have a board op run everything. My favorite SMPTE show was EFXin Vegas, where they had a huge red "GO" button. After it was hit everything took care of itself, there were still board ops and crew in place just in case the automation failed.
As I recall, the Vegas show had technicians that, for certain effects, had to first make sure the effect was safe to proceed. They would then hold down an enable button allowing the effect to be triggered. So even in a heavily automated show there can be a need for manual intervention.
-MH
Mac Hosehead wrote:As I recall, the Vegas show had technicians that, for certain effects, had to first make sure the effect was safe to proceed. They would then hold down an enable button allowing the effect to be triggered. So even in a heavily automated show there can be a need for manual intervention.
True there were "dead man" switches for the pyro and large effects.
In a show I did last year we employed 4 air cannons with streamers and confetti. Due to stage limitations the cannons were place close to floor level in a casino venue. We had 4 separate operators personally monitor the safety conditions of each cannon and then fire it on cue.
Wouldn't you know it, but in the middle of executing the shows cues, a kid walked in front of the cannon and asked... "Whats this?" the operator politely escorted them to the side, then fired the cannon... a few seconds late... but safely.
Just goes to show you ... human intervention is a must when using these kind of effects.
Regards,
Lightman
