Small Issue
 
Notifications
Clear all

Small Issue

7 Posts
4 Users
0 Reactions
2,865 Views
Posts: 2216
(@ctmal)
Famed Member
Joined: 19 years ago

I would try a snubber on the outputs. For the price of a resistor(almost nothing), there's a chance it could fix the issue.

The 47K 1 watt resistor. Check out this post for an easy way to do it.
http://doityourselfchristmas.com/forums/showthread.php?34100-Is-this-device-the-same-thing-as-a-quot-snubber-quot&p=337803#post337803


Reply
Posts: 3735
(@algerdes)
Famed Member
Joined: 15 years ago

FYI-All of our SS24, SS16, SS8 had them applied. The original reason was that LED strings weren't enough of a draw to shut the triacs down, leaving some to slightly glow when they were supposed to be off. Though we had similar problems as the OP during wet weather, we found that after the addition of the resistors, even the leakage problems went away. Our original AC setup had 416 channels and we were thankful that we didn't have to hunt down the glowing lights after their application.

Of course 416 channels seems trivial against what we send out today, but that is another thread at another time.


Reply
Page 2 / 2
Share: