Renard Wireless
 
Notifications
Clear all

Renard Wireless

17 Posts
8 Users
0 Reactions
11.2 K Views
Posts: 360
Topic starter
(@jlstout)
Reputable Member
Joined: 16 years ago
[#43229]

So I am trying to add my neighbors across the street to my show. I bought 4 xbee modules and 4 of the xbee snap in assemblies from dirknerkles store. I have 3 houses in my show now, each running on its own serial port. I want to run the house across the street on its own port as well. What do I need to plug an xbee transmitter into a serial port? I don't want to run it off the end of an existing board, but directly from my com port. Couldn't find anything on dirknerkles store. Looked on the spark fun website, but I am not sure what I need.


16 Replies
klyneshouse
Posts: 230
(@klyneshouse)
Reputable Member
Joined: 16 years ago

The same Sparkfun XBee Explorer USB you can program it with, can/will become its own serial port under windows that can be set to an output.
https://www.sparkfun.com/products/11812
(usb cable not included) Mine use the fatter one than the common one used to charge a phone with.

Make sure you also set the baud in windows to same speed as the x-bees are running.


Reply
Posts: 135
(@wirenut1980)
Estimable Member
Joined: 15 years ago

The explorer board that klyneshouse mentioned works like a charm. It even has a power on and data stream indicator to help with troubleshooting.


Reply
Posts: 360
Topic starter
(@jlstout)
Reputable Member
Joined: 16 years ago

Thanks for the quick replies!


Reply
Posts: 360
Topic starter
(@jlstout)
Reputable Member
Joined: 16 years ago

Another quick question. The cut lines on the pcb from dirkknerle is just to break the circuit trace at different spots for different boards?


Reply
Page 1 / 4
Share: