Micro DC Renard?
 
Notifications
Clear all

Micro DC Renard?

22 Posts
9 Users
0 Reactions
7,980 Views
Posts: 499
Topic starter
(@frederic)
Honorable Member
Joined: 14 years ago
[#34839]

For a couple of my display elements, I'd like to build really tiny 12VDC powered eight channel Renards.

Looking at the various SS-style schematics, I see what I have to change as well as what can be removed.

Eventually, I'd like to up the speed, assign a start address, and use Komby nRF products, but for now I'm just trying to start with the basics.

My question relates to firmware - since I'll be removing the unnecessary ZC detection, which standard firmware in the DIYC library would be the best choice to start with? Can that be upgraded to 115,200 baud at some point? Can that be upgraded to the start address firmware later on?

The code is my Achilles heel 🙂

Thanks in advance,

Frederic


21 Replies
hasoon
Posts: 520
(@hasoon)
Honorable Member
Joined: 15 years ago

Unlike the Xbee equipment, you set the starting address on the Komby device so all is your Renards can use the same firmware.


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago

You could use a PIC16F1825. It doesn't use an external osc. Configure the firmware for DC, and it uses the renard protocol. You can use a USB to serial converter, like one of Kombys FTDI boards. Heck make the whole thing out of surface mount devices, then it would be really small. The 1825's firmware is in the file library,written by Phil Short.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago

HeadBlinker is only 2" square, sounds to me like it's exactly what you're looking for... in the DIGWDF store... use either the PIC16F688 or the PIC16F1825.... ask for the HC version if you need more output current...


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago

Sorry Dave, I must have suffered a brain cramp. I totally forgot about the headblinker. badboy!


Reply
FIRECOP252
Posts: 1292
(@firecop252)
Noble Member
Joined: 16 years ago

I didnt know the Headblinker was DC.


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago

I don't think I would want to run an AC cord to my head! Maybe it might help my brain cramps!! The PIC's are programmed for DC operation. Also addressing for wireless setup. Great little device. I have a couple and why I missed the point of this is beyond me!! I guess I may have been thinking small, which happens all the time. If you use the 1825 PIC no oscillator is needed either.


Reply
ukewarrior
Posts: 4674
(@ukewarrior)
Illustrious Member
Joined: 18 years ago

Doesn't the new Rapter controller do what you want?


Reply
gdyrdave
Posts: 916
(@gdyrdave)
Noble Member
Joined: 16 years ago
ukewarrior wrote:Doesn't the new Rapter controller do what you want?

Only if it needs AC mains for power.


Reply
dirknerkle
Posts: 10310
(@dirknerkle)
Illustrious Member
Joined: 18 years ago
FIRECOP252 wrote:I didnt know the Headblinker was DC.

Headblinker has always been DC only. It's so small it's wearable!


Reply
Page 1 / 3
Share: