4 channel Renard co...
 
Notifications
Clear all

4 channel Renard code

20 Posts
4 Users
0 Reactions
7,363 Views
Posts: 2215
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago
[#53484]

Has anyone modified the Renard code to only consume 4 channels(for a 4 channel controller)? I'm thinking on making some changes and 4 channel controllers would be perfect, plus it would leave open pins to do some other things(i.e. I'm pondering different ideas to notify me if a board isn't receiving a signal, looses AC, etc.).

I tried searching for "4 channel" but the search parameters only searched "channels". Ha...got a lot of results.


19 Replies
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

That sort of rings a bell, but I couldn't find any such code in my archives. As I recall someone else wanted that and I did something, but that was a long time ago and I'm not certain if that was created from a late version of the 8-channel code. Is the file library still around? I couldn't find it when I looked for it recently, but the code might be there.


Reply
Posts: 6728
(@p-short)
Illustrious Member
Joined: 19 years ago

It was an easy mod to the last PIC16F688 code, although I'm not set up to test it now. I'll look for the PIC16F1825 code tomorrow.


Reply
Posts: 2215
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago
P. Short wrote:It was an easy mod to the last PIC16F688 code, although I'm not set up to test it now. I'll look for the PIC16F1825 code tomorrow.

Thanks Phil! I just searched for any posts with Renard and Channel in it and couldn't find it. No worries if you can't find it, if you don't I'll have to figure it out....it's been awhile since I've looked at the code. Not to mention I trust you're coding skills over mine any day.


Reply
Posts: 2215
Topic starter
(@ctmal)
Famed Member
Joined: 19 years ago
MikeKrebs wrote:Not quite what you asking for but ...
Dirk used to make a 4 channel controller...IIRC, it was really a 8 channel controller. You just ignore the last four channels. Renard Plus now sells a version
http://www.renard-shop.com/home/90-renard-plus-fourbanger-controller.html
If you look at the board, you will see that all 8 channels are brought out of the pic but only 4 attach to the VO2223 chips.
Now if you are going to reprogram the last 4 IO to do something else, you will have to modify the code.

I saw that but, you're right, not really what I'm looking for. I'd imagine that could become a mess in Vixen (I use 2.1) with all the empty channels.


Reply
Page 1 / 4
Share: