Strange Sequence Be...
 
Notifications
Clear all

Strange Sequence Behavior

11 Posts
3 Users
0 Reactions
8,020 Views
Posts: 82
Topic starter
(@mikesd)
Estimable Member
Joined: 12 years ago
[#34970]

I guess I'll put this in the FPP forum, since it's only FPP that has the problem. But I don't know, really, if it's FPP or something else.

I have a 300 RGB light strip. It's not 300 channels but 300 pixels (900 channels). It's connected to a single channel on the e682 controller. I have it setup to use Universe 1, 510 channels, AND Universe 2, 390 channels. It works perfectly using the built in tests, on the e682 web page.

I setup Vixen 3 to control this string and created some sequences. They work perfectly using Vixen 3. All 300 pixels work great, and exactly as expected. I used some chase effects, Nutcracker, solid colors, etc. All pixels light perfectly.

THEN, I exported the sequence to the format for FPP (*.fseq). I put it in my sequence folder on my USB and started the FPP. FPP was previously configured for the same Universe setups. Everything worked as expected... ALMOST. The effects (by type) worked properly over the entire strip of lights. But right at the Universe boundary, the colors were off. This ONLY happens when using FPP.

Example: I'm at work, so I don't recall the exact colors but say I made the string all Red. It would be Red, up to the point between Universe 1 and 2. At that point the string might be Blue from universe 2 on. Like I said, this only happens in FPP. Vixen 3 displays the effect over the entire string properly.

Say I have a twinkle effect, in White. Right up to the universe boundary (170 pixels), the twinkle is White. From universe 2 on, the twinkle has some other color.

Any idea what might be causing this?


10 Replies
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

you got a screen shot of universes from e682 and export list from vixen?


Reply
Posts: 82
Topic starter
(@mikesd)
Estimable Member
Joined: 12 years ago

I'll have to wait till noon to post it. Is the export list in text format? I thought xseq was binary. Oh wait, when I export, there are two files created. Maybe the other is text.


Reply
duramadmax
Posts: 904
(@duramadmax)
Noble Member
Joined: 16 years ago

just the screen shot of the export channel list you see...


Reply
Posts: 376
(@k-state-fan)
Reputable Member
Joined: 16 years ago

When you cycle thru the colors using the FPP is the last pixel on for all three colors? or is it just on for one of the colors?


Reply
Page 1 / 3
Share: