I2C communication
 
Notifications
Clear all

I2C communication

8 Posts
5 Users
0 Reactions
2,575 Views
Posts: 34
Topic starter
(@rauco)
Eminent Member
Joined: 15 years ago
[#55596]

Is there a way for Falcon Player to send and receive I2C commands? But I'd like to do is send a command from an Arduino to start a video, and then have the player send a command back when the video is finished.


7 Replies
MartinMueller2003
Posts: 7613
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Dont know about FPP directly but there is nothing stopping you from writing a PI application that would do that.


Reply
Posts: 451
(@utimgr)
Honorable Member
Joined: 14 years ago

Why not use the GPIO inputs for that? On my list of things to do, play with that feature of FPP but I think its designed to trigger things on rising and falling edge detects?


Reply
Posts: 34
Topic starter
(@rauco)
Eminent Member
Joined: 15 years ago

Thanks. That was my next thought. Hopefully it can trigger a GPIO when the video is finished.


Reply
Posts: 5
(@arti-g)
Active Member
Joined: 10 years ago

I have simmilar problem. Any direct connection between Arduino (or ESP) and FPP would be great! I2C, SPI, UART, PWM? GPIO is not enough for more complex setups when you have to send numbers not only 0-1.

I'm currently working on an interactive light installation that will be fun to play. Arduino with hall sensors will be choosing number between 1-30 to send to FPP, which will play one of 30 sequences. Then FPP sends info to Arduino that sequence ended and Arduino chooses another sequence based on interaction with hall sensors.

Only plugins for communication between Arduino and FPP I know are OSC and MQTT, which use network (cheapest is to use any ESP, cheaper than Arduino + wifi or ethernet shield). But why use wifi when Arduino and Raspberry sit next to each other? I2C or SPI would be best.


Reply
Page 1 / 2
Share: