Getting sequence to...
 
Notifications
Clear all

Getting sequence to work

15 Posts
5 Users
0 Reactions
5,459 Views
gassy
Posts: 548
(@gassy)
Honorable Member
Joined: 17 years ago

When you say "when I run a test it works fine" is that from the FPP?


Reply
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago
gassy wrote:When you say "when I run a test it works fine" is that from the FPP?

each respective test works. f16 test output is good, fpp test output is good, xlights test output is good.

when i run my sequence in xlights and "output to lights", it works properly. when i take that sequence and upload it to the fpp via the fpp web interface and test it, no lights come on at all.


Reply
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago
DMJPixel wrote:Deleted 1st thought - missed the 1st screenshot which made my answer invalid.

Could the 510 universe size be causing issues? I believe Falcon and FPP support 512 for a universe size - this is how I have mine setup. I am not sure that would impact to where no lights would be on but thought I would at least mention it.

I also wonder if the xLights channel mapping not matching up with the FPP e1.31 configuration is causing the issue...my gear is in use or I would run a couple of tests.

I am just in my first year so sorry I do not have better answers.

I suppose this could be an issue, but i have the f16, fpp and xlights all set to use 510 channels.


Reply
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago
afremont wrote:When you click on the ping button on the FPP page, does it work? Is fppd running?

Sent from my Moto G (4) using Tapatalk

yes. the ping works.


Reply
Posts: 110
Topic starter
(@corydorning)
Estimable Member
Joined: 13 years ago

Just changed the channels in the xlights model to be 28561 to 31710. uploading it to fpp now. will report back.


Reply
Page 2 / 3
Share: