FPP and esPixelsSti...
 
Notifications
Clear all

FPP and esPixelsStick

10 Posts
3 Users
0 Reactions
7,291 Views
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago
[#50259]

This might be the silliest question but here it goes.

I have the Pi and FPP playing a xLight sequences playlist on the P10 matrix. FPP is also setup to control 1 esPixelStick for the animated toy soldier wireframe that uses an xlight sequence.

The outputs setting for the pixelstick are working - as the toy soldier works perfect when testing that sequence.
How to I get the pixelstick sequence to play continuously while the FPP is playing the P10 playlist?

Thanks


9 Replies
Posts: 843
(@captainmurdoch)
Prominent Member
Joined: 14 years ago

If you can’t or don’t want to put them in the same .fseq file, you could export the toy soldier sequence as an ‘effect sequence’ and run that in a loop on that FPP. To export the toy soldier effect sequence, left click on the model name in the sequencer tab and then look for the export model as an effect menu option. The you can use a script from FPP’s script repository to start the effect looping and another script to stop it later.


Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Thanks - I got everything installed but nothing will play. I certainly missed something.
If I ping the pixelstick from FPP - on the matrix PI or a PI only setup with the pixelstick - everything seems okay.
If I "play" the effect through the Pi / FPP that only has the pixelstick "its works"
But when I "play" the effect from the Pi / FPP with the matrix it does not play.

I have 46080 channels on the matrix - does that equal 90 universes - and the pixelstick should be universe 91?
This part of FPP is new to me.

effct
effect2
script

Reply
Posts: 793
Topic starter
(@covewi)
Noble Member
Joined: 17 years ago

Any suggestions? I am sort of stuck.
Thanks


Reply
MartinMueller2003
Posts: 7614
(@martinmueller2003)
Illustrious Member
Joined: 14 years ago

Please post a picture of the channel configuration. Are you sure both PIs are set up exactly the same? You might want to ppost the config for the pi that works as well.


Reply
Page 1 / 2
Share: