BeagleBone black Ac...
 
Notifications
Clear all

BeagleBone black Access

19 Posts
5 Users
0 Reactions
14.5 K Views
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
[#50946]

I have the 5 pin from the Beagle Bone Black plugged into my USB on my computer and I can't access the FPP page to change my IP address. What am I doing wrong?
I also tried the cat5 and did a scan but it can't find the beagle bone at all.

What I'm trying to do is, I have a P-10 board that I run in Multicast and now I want to give it it's own IP address.
Thanks for your help
John


18 Replies
Posts: 2507
(@mrgrumpy)
Famed Member
Joined: 12 years ago

When I connect PC USB to BBB miniUSB the iP to connect is 192.168.70.2


Reply
Posts: 230
Topic starter
(@oldandslow)
Reputable Member
Joined: 16 years ago
mrGrumpy wrote:When I connect PC USB to BBB miniUSB the iP to connect is 192.168.70.2

Thank you. I tried your IP address with no luck.
it has been a few years since I been on the page. I remember just putting in the 5 pin on the controller and the USB in the computer.
I tried all my known IP addresses with no luck.
Thank you for your input.
John


Reply
Posts: 629
(@dkulp)
Honorable Member
Joined: 14 years ago

No... it's not via the 5 pin connector unless you also have some sort of terminal program to then login via the serial console. If you do that, however, it's purely command line access only so you would need to configure network via editing the files. That said, an ifconfig or similar would at least print the ip address.

What you need is a USB cable to plugin to the mini-usb port. (and ONLY power it via that port for this, do NOT have the octo plugged into 5V as well). THat will power the BBB via the mini-usb and will also allow browsing via 192.168.7.2 or 192.168.6.2 (windows vs OSX/Linux).


Reply
Posts: 144
(@drewdennis)
Estimable Member
Joined: 9 years ago

Are you sure the FPP image was installed to the MicroSD card properly? Can you connect a monitor to it and see whats happening during boot?


Reply
Page 1 / 4
Share: