That was me measuring the power out of the SSR outputs to make sure when I told them to be at full they were getting the complete 119 volts.
The 6 volt regulator solved almost all my issues. Fading is still not great but certainly much smoother than before and all problems with missing channels have dissipated. Thanks for you help a lot. Glad you were able to understand the problem so well and pinpoint a solution. I'm very grateful.
Aaron
Aaron, glad to hear that things are better! I suspected that your regs would change the picture quite a bit.
Congrats on your show!
Can you tell me what SSR's you are using? I'm still collecting data on what to troublshoot next on my flicker problems! Thanks. -james
Aaron,
Glad to hear of your positive progress. I may have missed it in a thread above but are you using a wall wart or a higher amperage transformer?
Greg
James, Thanks, I am using the SSR ez's. And please let me know if there is anything I can do to help you troubleshoot.
Greg, I am still running the wall wart that was in the original BOM although I have ordered a new transformer rated at 2.5 amps. When they arrive I will swap it out with the wallwart but everything has been running well since I replaced the reg. Now I need to troubleshoot the terrible dimming that I'm getting from my LED's.
Aaron
Aaron, are you using AC dimming or PWM dimming on the modules driving the LED's?? I haven't done a lot of looking at the difference in the plugin, but it's maybe something to look at! I don't have any LED's so I am using the AC setting, but I assumed that the PWM setting in the plugin was just for such thing (someone can jump in and tell me I'm wrong if I am!!) -James
