MINI down Under (Me...
 
Notifications
Clear all

MINI down Under (Melbourne)

294 Posts
36 Users
0 Reactions
113.1 K Views
Posts: 604
(@aussiephil)
Honorable Member
Joined: 19 years ago

MPH

Very kind and good idea, i'd be in for one just to help out and not to mention get another dongle as well. 🙂
still need to get there yet....

Aussiephil


Reply
toodle_pipsky
Posts: 1285
(@toodle-pipsky)
Noble Member
Joined: 19 years ago
mrpackethead wrote:Srry, its like the event tshirt.. If you dont' come, you can't get one.

There's a t-shirt too??!?!?! 😉

$25 is a fair price, I'd be happy to pay that to have a go. Good idea to do something practical.

PS - seriously, we need a tshirt. they should all say NERD . . . . in el wire so it blinks. hehehehe


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago

You know, once you start on SMD, you probably won't want to go back to those pesky components with long bits of wire attached to them.. You'll enjoy spending you money on other thigns ( smd is cheaper ), and you'll be able spend more time with your family ( smd construction is WAY faster ) and you'll be able to build things that you can't with Through hole ( theres Lots of thigns only available in SMD )..

Maybe the down-under crew might actually buck this trend of being scaredie cats of smd


Reply
mrpackethead
Posts: 2289
(@mrpackethead)
Famed Member
Joined: 19 years ago
toodle_pipsky wrote:There's a t-shirt too??!?!?! 😉

$25 is a fair price, I'd be happy to pay that to have a go. Good idea to do something practical.

PS - seriously, we need a tshirt. they should all say NERD . . . . in el wire so it blinks. hehehehe

Bom Costs in $A

FT245RL $4.05
ATMEGA88 $3.98
USB PLUG $0.90
NKE1205 $7.80
6 x 100nF Caos $0.18
2 x 16pF Caps $0.08
2 x 16Mhz Xtal $0.92
1 x 6N137 SMD8 $0.90
1 x MAX481 ( or equiv ) $0.70
1 x SMD LED $0.12

Thats $19.63...
You can choose to make a wired ouput tail or put your own ( expensive ) 5PIN XLR connector...

PCB's are $3 a go, and there was a probalby a bit of freight.. So, with some solder paste and stuff, i figure $25.00 is about right..

You can actually dispense with the NKE1205 part ( dc/dc converter ) but then you dont' have properly isolation between input and output, and i don't recommend it.

I'll bring my ATMEGA programmer so you can program your chips..

Because we are going to run out of time if we are not careful, i might run the boards through the pick and place and get them to place the FT245 and the Mega88 in the machines.. This will still give you the chance to place a soic chip, and a bunch of discretes, which is a good start.


Reply
Dave Burrows
Posts: 84
(@dave-burrows)
Estimable Member
Joined: 17 years ago
mrpackethead wrote:Bom Costs in $A

FT245RL $4.05
ATMEGA88 $3.98
USB PLUG $0.90
NKE1205 $7.80
6 x 100nF Caos $0.18
2 x 16pF Caps $0.08
2 x 16Mhz Xtal $0.92
1 x 6N137 SMD8 $0.90
1 x MAX481 ( or equiv ) $0.70
1 x SMD LED $0.12

Thats $19.63...
You can choose to make a wired ouput tail or put your own ( expensive ) 5PIN XLR connector...

PCB's are $3 a go, and there was a probalby a bit of freight.. So, with some solder paste and stuff, i figure $25.00 is about right..

You can actually dispense with the NKE1205 part ( dc/dc converter ) but then you dont' have properly isolation between input and output, and i don't recommend it.

I'll bring my ATMEGA programmer so you can program your chips..

Because we are going to run out of time if we are not careful, i might run the boards through the pick and place and get them to place the FT245 and the Mega88 in the machines.. This will still give you the chance to place a soic chip, and a bunch of discretes, which is a good start.

You can count me in as well MPH, should i bring a soldering iron and gear with me?
And Mrs B (genevieve) would certainly enjoy the company.


Reply
Page 37 / 59
Share: