G`Day
I moved to Perth From the states a few years ago and sold all my lights and controllers. I did a 64 channel 4 color show with synchronized music.
Im getting ready to start up again and am trying to understand how the lights work here. I have not found any commercial grade lights.
I use C-7 or C-9 size & LED Mini`s. I must have Green, Blue, Red & White in both sizes.
I see that the 240 volt sets here have a stepdown transformer & I will not use a transformer after my output and before the lights.
How can I get past this issue? I am afraid to build any boards until i sort this out.
I am set on going with all LED this time and hoping to find commercial grade wholesalers.
I would appreciate any advice in regards to these issues.
Hi Robert. Welcome to AUS
Well most of the light strings in AUS use 24VDC to power the strings. These are switched by Mosfets in the controllers. you would normally cut these controllers off the strings and wire them to either the DCSSR's or to SSR's with a bridge rectifier on them and run the whole thing from torroid transformers or such. (I just run a big 24V power supply)
Some of the strings (mostly motif's etc) run off 240V but care must be taken to ensure that the wiring is done safely and insulated (sealed) to ensure that water etc does not get into the wiring and SSR enclosures. Most of the SSR boards around will work with 240V and may just need a change of a few resistors to accomodate the voltage change.
I run a mixure of 24V and 240V strings in my display. Most of the 24V run off a single 24 - 30V adjustable supply and are driven by 595 / darlington NPN transistor arrays (see OLSEN) this is run from a ren-c controller into Vixen.
The 240V stuff run off SSR's placed around the yard and made waterproofed and the strings plug into modified Power Boards for the SSR's so it all just plugs in.
I hope this gives you an idea
Wombat
Thanks Wombat
That helps me get the picture better.
Would you know of any good sources for light strings?
I would like to start out with 20,000 5,000 of each colour.
Welcome! I must say you Americans have been spoilt with lights, sorry Robert, but sourcing lights might become the bane of your existence in Oz. Bunnings Hardware have lights all year round, their range varies from store to store, so I couldn't comment on what your local has. There are various online stores too (a search for Christmas lights in Google will reveal most of the good ones). Lights are expensive here (so that's where the "spoilt" comes in) - but sometimes you get to pick up a bargain. Expect anywhere from $20 to $70 for a set of lights. There's a thread around here about a wholesaler in Adelaide, I think, that had 100m for $200 or something like that - I'll have to scope it out.
For the record - I have 2 Ren-c/Grinches and 3 Ren16s. 99% of my lights are 24/36V, I have a few 240V spotlights and ropelights. I don't use any of the transformers that come with the lights, everything's powered by torridal transformers. Which reminds me, I need to buy another one this year! 🙂
Hope my dribbling on helps!
Thanks Toodle, Lights are hard to come by. I`m so used to line voltage lights outside. I see some 240 volt outdoor leds, will have to investigate further.
I cannot put up my show without at least 5,000 of each colour " red, green, blue, white. This will definitly be my biggest challenge
toodle_pipsky wrote:There's a thread around here about a wholesaler in Adelaide, I think, that had 100m for $200 or something like that - I'll have to scope it out.
http://doityourselfchristmas.com/forums/showthread.php?t=6875
They are also doing 50m strings (500 LEDS) as well
edward57 wrote: http://doityourselfchristmas.com/forums/showthread.php?t=6875They are also doing 50m strings (500 LEDS) as well
Is the pricing on the web site, l can't find the 100m or the 50m strings ???
Goldie wrote:Is the pricing on the web site, l can't find the 100m or the 50m strings ???
They have ordered them for DIYC customers.. and will go on the shop shelf if they dont sell a few weeks before xmas..
Give them a ring.. on (08) 8354 0545
I hate Bunnings. Went in Monday and bought 40 boxes of Arlec 150 string lights for $8 each. Went back in today to the Bathurst store and they were back to 9.99 each and they would not drop the price at all, even though they are the same stock. The woman would not be swayed and after I asked her a second time she got rather ticked off. Heck I even offered to buy the remaining stock at $8 each
that's one store I will not return to, even after I have spent over $1600 there since may this year.
the sourcing of lights at bunnings is an adventure, last christmas advertised in the paper 150 light strings $6.00, so off to our new mittagong shop we go,but alas no lights . i went home and shot off an e-mail to these loverly people and after a lot of mailing i have found out that not all centres recieve all items. so while visiting people down the coast at a place called warrawong there is a bunnings and there o n the shelf 42 boxs of them $6.00/ box i offered them $5.00 a box for the 42 and they agreed . I have since been down there in the past month only this time there was only 30 boxs so i did the same thing and they agreed, in mittagong they are still waiting for the supplys to get there. it so frustrating. thats my rant for the week!!!!!!

