Very very cool! I can think of a few display uses for them!
Any thoughts on how long strings(s) of these would compare with the Galaxia products? The cost of a string by itself is probably more than the Galaxia string, but the equation would tip the other way when the controller costs are included. Plus you get RGB with this approach...
Phil - I'd expect that you're generally correct. I haven't looked at Galaxia's price sheet for a while.
Controller cost for these could range from $2 for an 16F688 to a $30K+ touring lighting console.
NB! This revision of the design is not pin-compatible with older point-source boards which may already be in circulation. While all versions use a group of 10 pins on .1" centers, the wiring is quite different.
In the spring, a couple of us are going to finalize a stand-alone Vixen file playback machine. It will support .mp3 and .vix playback from an SD/MMC card and drive between 1 and 4 discrete DMX universes...
Nice work! So what's the per-unit cost of an RGB LED Pixel in the 'few dozen' quantities?
Thanks for the kind words...
Incremental price of raw materials at 100 pieces looks something like this:
$1.25 processor
$0.45 LED
$0.19 RS-485 receiver
$0.15 regulator
$0.40 misc. R & C parts
$0.10 10 pin header
To these prices...
* Add tooling charge for PCB design
* Add PCB cost (very, very small on a run of 600. Board size is .55" x 1.3")
* Add 'stencil' charge for SMD pick & place automated assembly
* Add assembly labor per board
* Add processor programming & testing labor
* Add $17 / 100 feet of ribbon cable. I've been thrilled with boards on 8" centers
* Add $0.20 for female IDC connectors, one per pixel
* Add 16 gauge wire (power) + shielded wire (data) to run from 'home base' to the string. The ribbon cable is only used for the actual string.
Boards were manufactured overseas by a company I've had a long relationship with.
Assembly has been stateside, about 10 minutes from home. Advantages include (1) a single time zone, (2) a common language, (3) a two day (!) turn on 80 prototype boards and (4) not paying FedEx hundreds of dollars to see the finished product 3 weeks later.
I put a string of 34 up on the roof last night for a test run. They looked Awesome.
