DMX E682 noob quest...
 
Notifications
Clear all

DMX E682 noob question

2 Posts
2 Users
0 Reactions
1,578 Views
Posts: 10
Topic starter
(@marbel)
Active Member
Joined: 14 years ago
[#22024]

I'm confused on how connecting the RGB strips works.

1.1. Can strips be connected to other strips, or does each strip have to connect directly to the E682?

1.2. If strips can connect to other strips, can I mix and match digital with non digital strips?

1.3. If strips can connect to other strips, can I connect non-digital strips together and then have each strip on a different channel? ie: Can I connect from the E682 to first non-digital strip, then connecting from first non-digital strip to second non-digital strip, and then having the first strip being channels 1-3 and the second strip being channels 4-6.

2. Is there a maximum length for a strip being connected to the E682?


1 Reply
Posts: 4092
(@skunberg)
Famed Member
Joined: 18 years ago
MarbeL wrote:I'm confused on how connecting the RGB strips works.

1.1. Can strips be connected to other strips, or does each strip have to connect directly to the E682?

1.2. If strips can connect to other strips, can I mix and match digital with non digital strips?

1.3. If strips can connect to other strips, can I connect non-digital strips together and then have each strip on a different channel? ie: Can I connect from the E682 to first non-digital strip, then connecting from first non-digital strip to second non-digital strip, and then having the first strip being channels 1-3 and the second strip being channels 4-6.

2. Is there a maximum length for a strip being connected to the E682?

Welcome to DIYC !!!
1.1 Yes, you can connect strips.
1.2 No you can not mix digital (pixels) with non-digital (RGB)
1.3 See 1.2
2. No, other than the maximum number of pixels for the E682. Note that at some point (normally around 50 depending on which pixels) you'll have voltage drop and need to inject power.

Brian


Reply
Share: