Where to start
 
Notifications
Clear all

Where to start

3 Posts
3 Users
0 Reactions
1,607 Views
Posts: 12
Topic starter
(@bazorka)
Eminent Member
Joined: 15 years ago
[#17922]

Being new to these forums and being new to this place of awesomeness I have a question concerning where would you go to start learning and understanding what is actually happening on these boards. I know a little (very little) in regards to a simple circuit with positive and negative and thats about it. WHile I am perfectly happy and grateful to all of the developers who have made thse boards and designs, I would really like to understand more about what is happening on the board and why it is doing what it is doing and what is going with resistor placement and all the other parts which I don't really quite understand what they do or why they are there. I know the wiki has some information which I have perused but where would I go for more information in getting a basic understanding and then working my way up to actually understanding what is happening to even possible after quite awhile being able to design a basic board myself? Hope this would be the correct forum for this. Also wouldn't mind finding a place for some of the programming involved with the PIC.


2 Replies
CaptKirk
Posts: 2200
(@captkirk)
Noble Member
Joined: 16 years ago

Your local community college probably offers some basic electronics classes. That is good because it will force some structure on your learning and will teach you about the basic components and why they are used. You might even learn how to solder properly. Elementary logic design is also helpful as that will get into how processors work as a general concept. You can spend time on the Wikipedia and look at all the resources there also but that is likely not sufficient. This is a great site to play around with this stuff because the code and schematics of the different boards are generally available so you can see how it works, and amuch of the why they work by correlating those. Digging into the source code will either make your head explode, or if you have done coding, help you to understand more what is going on.


Reply
macebobo
Posts: 1595
Guest
(@macebobo)
Member
Joined: 17 years ago

The way I have done my learning is:
1) Google.
2) Ask here.
3) Experiment.

These may work for you too.

I now know what all of the resistors are doing, how the RS232/485 works, how PICS work and why we have MOCS in front of our triacs and what the difference between 1oz and 2oz copper means. It has been a fun and wild ride and I could not have done it without the list of 3 above. Thanks everyone for #2.


Reply
Share: